Merck
CN

D9260

Sigma-Aldrich

葡聚糖 来源于肠系膜明串珠菌

average mol wt 9,000-11,000

登录查看公司和协议定价

线性分子式:
(C6H10O5)n
CAS号:
EC 号:
MDL编号:
NACRES:
NA.25

生物来源

bacterial (Leuconostoc mesenteroides)

质量水平

形式

powder

旋光性

[α]/D 199°

分子量

average mol wt 9,000-11,000

溶解性

water: 0.1 g/mL, colorless to faintly yellow

储存温度

2-8°C

InChI

1S/C18H32O16/c19-1-5(21)9(23)10(24)6(22)3-31-17-16(30)14(28)12(26)8(34-17)4-32-18-15(29)13(27)11(25)7(2-20)33-18/h1,5-18,20-30H,2-4H2

InChI key

FZWBNHMXJMCXLU-UHFFFAOYSA-N

正在寻找类似产品? Visit 产品对比指南

应用

葡聚糖被用于许多应用,如作为血小板凝集剂、血浆增容剂、渗透压调节剂、稳定剂、器官分离介质、基质组分、共聚物、微载体、粘合剂、粘度调节剂、抗血栓形成剂、润滑剂和物理结构组分。它们可以用作长亲水间隔臂,改善缀合/结合蛋白的性能(运动自由度)。葡聚糖可以衍生化,用于生物传感器系统。
小于60,000Da的葡聚糖通常被认为是低分子量葡聚糖。 低分子量葡聚糖的粘度、聚集和渗透性质使其通常优于高分子量葡聚糖。 高分子量、水溶性葡聚糖聚合物已可用于各种生物医学应用中。葡聚糖(9,000-11,000),是一种低分子量葡聚糖,可用于研究瞬时细胞膜和血脑屏障(BBB)透化等过程。在蛋白质包装和折叠研究中,它可以用作糖类拥挤剂。
将右旋糖酐用作长的亲水性间隔臂提高了作用于大分子的固定化蛋白质的性能。

制备说明

葡聚糖是具有很好的水溶性,最高分子量的葡聚糖D5501(分子量范围 =500万至4000万)除外。 Sigma测试葡聚糖在水中的溶解度通常超过30mg/ml。 葡聚糖也易溶于 DMSO、甲酰胺、乙二醇和甘油。 中性葡聚糖水溶液可在110-115oC下高压灭菌30至45分钟。葡聚糖在高温下可被强酸水解。葡聚糖的末端还原端基可在碱性溶液中氧化。

其他说明

为了全面了解我们针对客户研究提供的各种葡聚糖产品,建议您访问我们的碳水化合物分类页面。

储存分类代码

11 - Combustible Solids

闪点(°F)

Not applicable

闪点(°C)

Not applicable

个人防护装备

Eyeshields, Gloves, type N95 (US)


分析证书(COA)

输入产品批号来搜索 分析证书(COA) 。批号可以在产品标签上"批“ (Lot或Batch)字后找到。

已有该产品?

为方便起见,与您过往购买产品相关的文件已保存在文档库中。

访问文档库

难以找到您所需的产品或批次号码?

在网站页面上,产品编号会附带包装尺寸/数量一起显示(例如:T1503-25G)。请确保 在“产品编号”字段中仅输入产品编号 (示例: T1503).

示例

T1503
货号
-
25G
包装规格/数量

其它示例:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

输入内容 1.000309185)

遇到问题?欢迎随时联系我们技术服务 寻求帮助

批号可以在产品标签上"批“ (Lot或Batch)字后面找到。

Aldrich 产品

  • 如果您查询到的批号为 TO09019TO 等,请输入去除前两位字母的批号:09019TO。

  • 如果您查询到的批号含有填充代码(例如05427ES-021),请输入去除填充代码-021的批号:05427ES。

  • 如果您查询到的批号含有填充代码(例如 STBB0728K9),请输入去除填充代码K9的批号:STBB0728。

未找到您寻找的产品?

部分情况下,可能未在线提供COA。如果搜索不到COA,可在线索取。

索取COA

Eugen Sisu et al.
Rapid communications in mass spectrometry : RCM, 20(2), 209-218 (2005-12-15)
A combined methodology for obtaining at the preparative scale and characterization by nanoelectrospray ionization (nanoESI) quadrupole time-of-flight (QTOF) mass spectrometry (MS) and tandem MS (MS/MS) of linear polysaccharides modified at the reducing end is presented. Two polydisperse maltodextrins (1000 and
R J Stenekes et al.
Biomaterials, 22(13), 1891-1898 (2001-06-09)
In this paper, a novel method is presented for the preparation of dextran hydrogels and microspheres, based on crystallization. Although dextrans are known to be well soluble in water, precipitation was observed in concentrated aqueous solutions of low molecular weight
Thomas Rath et al.
Nephron. Clinical practice, 114(1), c81-c88 (2009-11-06)
Intravenous iron supplementation is a basic principle in the therapy of haemodialysis (HD) patients with renal anaemia. In the Iron Dextran in Renal Anaemia (IDIRA) study, we analysed the efficacy of a therapy with low-molecular-weight iron dextran (LMW-ID) in stable
Molecular Weight Effects on the Miscibility Behavior of Dextran and Maltodextrin with Poly(vinylpyrrolidone).
Van Eerdenbrugh B, Taylor LS.
Pharmaceut. Res., doi: 10-doi: 10 (2012)
Yuichi Ozaki et al.
Circulation journal : official journal of the Japanese Circulation Society, 76(4), 922-927 (2012-02-04)
Although an intracoronary frequency-domain optical coherence tomography (FD-OCT) system overcomes several limitations of the time-domain OCT (TD-OCT) system, the former requires injection of contrast media for image acquisition. The increased total amount of contrast media for FD-OCT image acquisition may

实验方案

硫酸葡聚糖以钠盐形式供应,使其在水中可溶且稳定。硫酸葡聚糖含有大约17%的硫,相当于每个葡糖基残基大约有2.3个硫酸基团。

葡聚糖是葡萄糖酐聚合物。它由大约 95% 的alpha-D-(1-6)键合组成。其余的 a (1-3) 键合构成了葡聚糖的分支。分支长度的冲突数据意味着平均分支长度小于三个葡萄糖单位。但是,其他方法表明存在大于 50 个葡萄糖单位的分支。

Dextran is a polymer of anhydroglucose. It is composed of approximately 95% alpha-D-(1-6) linkages. The remaining a(1-3) linkages account for the branching of dextran. Conflicting data on the branch lengths implies that the average branch length is less than three glucose units. However, other methods indicate branches of greater than 50 glucose units exist.

Dextran sulfates are supplied as the sodium salt forms, making them soluble and stable in water. Dextran sulfate contains approximately 17% sulfur which is equivalent to approximately 2.3 sulfate groups per glucosyl residue.

相关内容

Learn about C6H10O6 or dextran formation, classes and naming. Dextrans are polysaccharides with molecular weights ≥1,000 Dalton, which have a linear backbone of α-linked d-glucopyranosyl repeating units.

我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.

联系技术服务部门