Select a Size
About This Item
Product Name
Millipore Express® SHR with prefilter Cartridge, Chemistry: 0.5 / 0.1 µm Hydrophilic Polyethersulfone (PES) Configuration: 30 in. Code 7
Quality Level
material
polyethersulfone membrane, polypropylene housing, polypropylene support, polysulfone (core), silicone O-ring
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility
non-sterile
sterilization compatibility
autoclavable compatible
steam-in-place compatible
product line
Millipore Express®
feature
hydrophilic
parameter
1 bar max. differential pressure (15 psi) at 135 °C (Forward), 1.7 bar max. differential pressure (25 psi) at 80 °C (Forward), 2.1 bar max. differential pressure (30 psi) at 25 °C (Reverse), 6.9 bar max. differential pressure (100 psi) at 25 °C (Forward), 69 mbar max. differential pressure (1 psi) at 135 °C (Reverse)
technique(s)
sterile filtration: suitable
L
76.2 cm (30 in.)
diam.
20.7 cm (8.1 in.)
filtration area
1.44 m2 (15.5 ft2)
impurities
<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
matrix
Millipore Express® SHR (with prefilter)
pore size
0.5/0.1 μm pore size
bubble point
≥4000 mbar (58 psig), air with water at 23 °C
cartridge code
Code 7
General description
Application
Features and Benefits
- Reliable mycoplasma removal and sterilizing-grade performance
- Available with an on-board PES membrane prefilter for extended throughput in high-fouling solutions (SHRP)
- Broad chemical compatibility across a wide pH range
- 100% integrity tested during the manufacturing process
Analysis Note
After sterilization and a controlled water flush of 60 L, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645> at 25 °C.
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 107 CFU/cm² using ASTM® F838 methodology.
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer to Millipore Express® Membrane user guide
- Storage Statement: Please refer to Millipore Express® Membrane user guide
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
Legal Information
Regulatory Information
This item has
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Related Content
Millipore Express Family Guide
Global Trade Item Number
| SKU | GTIN |
|---|---|
| CHVE73TS48 | 04065273340815 |