Skip to Content
Merck
CN

KZRVA2TTT1

Opticap® XLT 20 Capsule Media: Viresolve® NFR

Chemistry: Polyethersulfone (PES) Inlet: 1-1/2 in. Sanitary Flange Outlet: 1-1/2 in. Sanitary Flange T-line Max Operating Pressure: 80 psi @ 25 °C

Synonym(s):

Opticap XLT20 Viresolve NFR 1-1/2 in. TC/TC

Sign In to View Organizational & Contract Pricing.

Select a Size

About This Item

eCl@ss:
32031690
UNSPSC Code:
23151806

Key Documents

View All Documentation
Technical Service
Need help? Our team of experienced scientists is here for you.
Let Us Assist
Technical Service
Need help? Our team of experienced scientists is here for you.
Let Us Assist

Product Name

Opticap® XLT 20 Capsule Media: Viresolve® NFR, Chemistry: Polyethersulfone (PES) Inlet: 1-1/2 in. Sanitary Flange Outlet: 1-1/2 in. Sanitary Flange T-line Max Operating Pressure: 80 psi @ 25 °C

description

T-line with 1-1/2 in. Gauge Port

product category

capsule filters

parameter

≤32 mL/min air diffusion at 3.45 bar (50 psig) (in water), 25 °C max. inlet temp., 3.4 bar max. differential pressure (50 psid) (Reverse), 5.5 bar max. differential pressure (80 psid) (Forward), 5.5 bar max. inlet pressure (80 psi) at 23 °C, 80 psig max. inlet pressure

technique(s)

protein purification: suitable

L

63.5 cm (25 in.)

device size

20 in.

filtration area

0.854 m2

hold-up volume

325 mL

inlet connection diam.

1 1/2 in.

outlet W

15.2 cm (6.0 in.)

outlet connection diam.

1-1/2 in.

size

1200-2400 L

impurities

≤0.5 EU/mL Aqueous extraction (LAL test)

matrix

Viresolve® NFR

fitting

1/4 in. hose barb (double O-ring Seal), hose barb 1/4 in. (double O-ring Seal), inlet sanitary flange, inlet sanitary flange, outlet sanitary flange, outlet sanitary flange, 38 mm (1 1/2 in.) sanitary flange drain/vent, sanitary flange drain/vent 38 mm (1 1/2 in.)

suitability

suitable for endotoxin

material

polyethersulfone , polypropylene , polypropylene support, polypropylene vent cap, silicone seal

Quality Level

400

Looking for similar products? Visit Product Comparison Guide

General description

A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.
After wetting, may be autoclaved for 3 cycles of up to 60 min at 125 °C, using liquid cycle, slow exhaust.

Packaging

Double Easy-Open bag

Analysis Note

Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥8 L
The extractables level was equal to or less than 70 mg after a 10 minute 1.5 LPM/ft² flush and 24 hours in water at controlled room temperature.

Other Notes

EMD Millipore Corporation certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.

Legal Information

OPTICAP is a registered trademark of Merck KGaA, Darmstadt, Germany
VIRESOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany

Disclaimer

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Regulatory Information

新产品
This item has

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service