Skip to Content
Merck
CN
  • Maltose and isomaltose in uremic plasma following icodextrin administration.

Maltose and isomaltose in uremic plasma following icodextrin administration.

Advances in peritoneal dialysis. Conference on Peritoneal Dialysis (2000-01-29)
R A Burke, J B Moberly, H Patel, T R Shockley, L Martis
ABSTRACT

The presence of mixed disaccharides (maltose and isomaltose) in plasma from uremic patients has been previously investigated using gel-permeation chromatography. However, this method is unable to separate maltose (linked alpha-1-4) from isomaltose (linked alpha-1-6). We describe an alternative method using high-performance anion-exchange chromatography with pulsed amperometric detection (HPAE-PAD) for the direct determination of maltose and isomaltose in uremic plasma. We measured maltose and isomaltose using HPAE-PAD in 6 normal subjects and in 15 uremic patients before and after once-daily icodextrin administration for at least 4 weeks. Both maltose and isomaltose were below limits of detection (< 1.0 mg/L) in plasma from normal controls. Patients with end-stage renal disease treated by continuous ambulatory peritoneal dialysis had elevated levels of isomaltose (23.6 +/- 8.3 mg/L) but low levels of maltose (< 3.0 mg/L). Treatment with icodextrin resulted in elevated plasma levels of maltose (range: 500-1600 mg/L), while levels of isomaltose declined to 9.8 +/- 5.2 mg/L (P < 0.0001 vs. baseline levels). We conclude that isomaltose (not maltose) is the primary disaccharide isomer that is elevated in the plasma of uremic patients, whereas maltose is the primary disaccharide isomer that is elevated following icodextrin administration. Furthermore, icodextrin administration results in an apparent reduction of isomaltose. Additional investigation will be required to address the mechanism for the reduction of isomaltose in patients treated by icodextrin.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Cadaverine, 95%
Sigma-Aldrich
Acetone, natural, ≥97%
Sigma-Aldrich
Acetone, ≥99%, FCC, FG
Sigma-Aldrich
Reagent Alcohol, anhydrous, ≤0.003% water
Supelco
Dehydrated Alcohol, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Acetone, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Acetone, analytical standard
Sigma-Aldrich
Trimethylamine solution, 31-35 wt. % in ethanol, 4.2 M, contains toluene as stabilizer
Sigma-Aldrich
Zinc, shot, <12 mm, 99.99% trace metals basis
Sigma-Aldrich
Zinc, foil, thickness 1.0 mm, 99.99% trace metals basis
Sigma-Aldrich
Zinc, shot, 5 mm, 99.999% trace metals basis
Sigma-Aldrich
Cadaverine, purum, ≥97.0% (GC)
Sigma-Aldrich
Ethanol Fixative 80% v/v, suitable for fixing solution (blood films)
Sigma-Aldrich
Reagent Alcohol, anhydrous, ≤0.005% water
Sigma-Aldrich
Zinc, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.9%, granular
Sigma-Aldrich
Reagent Alcohol, reagent grade
Sigma-Aldrich
Acetone, ACS reagent, ≥99.5%
Supelco
Ethanol-500, 500 mg/dL in H2O, ampule of 10 × 1.2 mL, certified reference material, Cerilliant®
Supelco
Ethanol-20 (10 ampules/kit), 20 mg/dL in H2O, ampule of 10 × 1.2 mL, certified reference material, Cerilliant®
Supelco
Ethanol Calibration Kit, ampule of 10 × 1.2 mL, certified reference material, Cerilliant®
Supelco
Ethanol-25, 25 mg/dL in H2O, ampule of 10 × 1.2 mL, certified reference material, Cerilliant®
Supelco
Ethanol-400 (10 ampules/kit), 400 mg/dL in H2O, ampule of 10 × 1.2 mL, certified reference material, Cerilliant®
Supelco
Ethanol solution, certified reference material, 2000 μg/mL in methanol
Supelco
Ethanol standards 10% (v/v), 10 % (v/v) in H2O, analytical standard
Sigma-Aldrich
Ethyl alcohol, Pure 190 proof, for molecular biology
Sigma-Aldrich
Acetone, ACS reagent, ≥99.5%
Sigma-Aldrich
Acetone, Laboratory Reagent, ≥99.5%
Sigma-Aldrich
Acetone, puriss., meets analytical specification of Ph. Eur., BP, NF, ≥99% (GC)
Sigma-Aldrich
Acetone, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.5% (GC)
Sigma-Aldrich
Acetone, histological grade, ≥99.5%