Skip to Content
Merck
CN

Short- and long-term effects of acetaldehyde on plasma.

Alcohol (Fayetteville, N.Y.) (2002-04-18)
Arthur S Brecher, Mohammed T Adamu
ABSTRACT

The effect of low concentrations of acetaldehyde on activated partial thromboplastin time (APTT) and prothrombin time (PT) of Accuclot coagulation plasmas was monitored over a prolonged time to mimic effects observed in alcoholism. A prolongation of the APTT from 31.9 +/- 0.7 s to 32.6 +/- 0.9 s (n = 8; P =.007) was observed after a 30-min preincubation time with 140 microM acetaldehyde. However, a minimum of 3.6 mM acetaldehyde was required to extend the APTT from 36.6 +/- 1.0 s to 41.2 +/- 0.8 s (P =.001) over an 18-h exposure time. Plasma acetaldehyde levels as low as 2.24 mM caused elevation of PTs from 12.5 +/- 0.5 s to 14.4 +/- 0.2 s (P =.005) after a 24-h preincubation time. These findings seem to indicate that short-term contact of acetaldehyde with plasma, probably yielding reversible interactions, may interfere with APTTs to a greater extent than long-term contact, which would presumably yield stable, irreversible interactions. In comparing the effects of 8.94, 17.9, 89.4, and 447 mM acetaldehyde on the PTs of Level I, II, and III plasma, the PTs were most increasingly prolonged in Level III plasma and least prolonged in Level I plasma at each acetaldehyde concentration, although the plasmas have comparable protein concentrations. These findings seem to indicate that coagulation factors are sensitive to inactivation by acetaldehyde.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Acetone, natural, ≥97%
Supelco
Nicotinic acid, analytical standard
Supelco
Ethanol solution, certified reference material, 2000 μg/mL in methanol
Supelco
Acetone, analytical standard
Sigma-Aldrich
Isopropyl alcohol, ≥99.7%, FCC, FG
Sigma-Aldrich
Reagent Alcohol, reagent grade
Sigma-Aldrich
Acetone, ≥99%, meets FCC analytical specifications
Sigma-Aldrich
Reagent Alcohol, anhydrous, ≤0.003% water
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Sigma-Aldrich
Acetaldehyde solution, natural, 50 wt. % ethanol, FG
Sigma-Aldrich
Acetaldehyde solution, 50 wt. % in ethanol
Sigma-Aldrich
Acetaldehyde solution, 40 wt. % in H2O
Sigma-Aldrich
Progesterone, meets USP testing specifications
Sigma-Aldrich
Nicotinic acid, ≥99.5% (HPLC)
Sigma-Aldrich
Ethanol Fixative 80% v/v, suitable for fixing solution (blood films)
Supelco
Ethanol standards 10% (v/v), 10 % (v/v) in H2O, analytical standard
Sigma-Aldrich
Nicotinic acid, BioReagent, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥98%
Sigma-Aldrich
Nicotinic acid, meets USP testing specifications
Sigma-Aldrich
Progesterone, ≥99%
Sigma-Aldrich
Reagent Alcohol, anhydrous, ≤0.005% water
Sigma-Aldrich
Nicotinic acid, ≥98%
Sigma-Aldrich
Acetaldehyde solution, 5 M in THF
Supelco
Methanol, analytical standard
Supelco
Dehydrated Alcohol, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Methanol, suitable for NMR (reference standard)
Sigma-Aldrich
Methanol, BioReagent, ≥99.93%
Sigma-Aldrich
Ethyl alcohol, Pure 190 proof, for molecular biology
Supelco
5α-Dihydrotestosterone (DHT) solution, 1.0 mg/mL in methanol, ampule of 1 mL, certified reference material, Cerilliant®
Supelco
Ethanol-500, 500 mg/dL in H2O, ampule of 10 × 1.2 mL, certified reference material, Cerilliant®