Characterization and humidity sensing properties of the sensor based on Na2Ti3O7 nanotubes.

Characterization and humidity sensing properties of the sensor based on Na2Ti3O7 nanotubes.

Journal of nanoscience and nanotechnology (2014-04-18)

Yupeng Zhang, Jian Wu, Ying Zhang, Wenbin Guo, Shenping Ruan

ABSTRACT

Na2Ti3O7 nanotubes was synthesized by a hydrothermal method, and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Then the material was coated on Al2O3 ceramic substrate to fabricate humidity sensors using Ag-Pd as interdigitated electrodes. The sensor shows high humidity sensitivity and quick response-recovery time. The impedance changes about five orders of magnitude within humidity range from 11% to 95% relative humidity (RH). At the frequency of 100 Hz, the response time is 2 s and recovery time is 4 s, and the maximum hysteresis is less than 3% RH. Moreover, complex impedance property at different RH was investigated to study sensing mechanism. The results indicate the potential applications of Na2Ti3O7 nanotubes for fabricating high-performance humidity sensors.

MATERIALS

Product Number

Brand

Product Description

78533

Supelco

Water, for TOC analysis

12156

Supelco

Density Standard 998 kg/m³, H&D Fitzgerald Ltd. Quality

95280

Sigma-Aldrich

Water, tested according to Ph. Eur.

320072

Sigma-Aldrich

Water, ACS reagent

W1503

Sigma-Aldrich

Water, for embryo transfer, sterile-filtered, BioXtra, suitable for mouse embryo cell culture

369489

Sigma-Aldrich

Titanium, foil, thickness 2.0 mm, 99.7% trace metals basis

34877

Sigma-Aldrich

Water, HPLC Plus

DENWAT

Pure Water Density Standard, UKAS ISO/IEC17025 and ISO Guide 34 certified, density: 0.9982 g/mL at 20 °C, density: 0.9970 g/mL at 25 °C

DENWAT3

Pure Water Density Standard, UKAS ISO/IEC17025 and ISO Guide 34 certified, density: 0.9982 g/mL at 20 °C, density: 0.9970 g/mL at 25 °C

GF61228403

Titanium, wire reel, 50m, diameter 0.75mm, as drawn, 99.6+%

GF46592949

Titanium, wire, straight, 1000mm, diameter 1.0mm, as drawn, 99.6+%

GF00761217

Titanium, wire reel, 200m, diameter 0.25mm, as drawn, 99.6+%

GF26694771

Titanium, wire reel, 20m, diameter 0.125mm, annealed, 99.6+%

GF47404201

Titanium, wire reel, 5m, diameter 0.20mm, annealed, 99.6+%

GF42959661

Titanium, tube, 1000mm, outside diameter 10mm, inside diameter 8mm, wall thickness 1.0mm, annealed, 99.6+%

GF13900205

Titanium, tube, 100mm, outside diameter 0.51mm, inside diameter 0.35mm, wall thickness 0.08mm, annealed, 99.6+%

GF04909653

Titanium, rod, 50mm, diameter 20mm, as drawn, 99.99+%

GF82495198

Titanium, rod, 200mm, diameter 9.5mm, annealed, 99.99+%

GF06082286

Titanium, microfoil, disks, 10mm, thinness 1.0μm, specific density 429μg/cm², permanent mylar 3.5μm support, 99.6+%

GF03916290

Titanium, rod, 490mm, diameter 2mm, annealed, 99.6+%

GF62977540

Titanium, tube, 200mm, outside diameter 2.03mm, inside diameter 1.63mm, wall thickness 0.2mm, annealed, 99.6+%

GF11909932

Titanium, tube, 100mm, outside diameter 4.25mm, inside diameter 3.75mm, wall thickness 0.25mm, annealed, 99.6+%

GF68670366

Titanium, tube, 1220mm, outside diameter 2.03mm, inside diameter 1.55mm, wall thickness 0.24mm, annealed, 99.6+%

GF72212813

Titanium, tube, 200mm, outside diameter 25.4mm, inside diameter 23.62mm, wall thickness 0.89mm, annealed, 99.6+%

GF13915447

Titanium, tube, 100mm, outside diameter 2.03mm, inside diameter 1.55mm, wall thickness 0.24mm, annealed, 99.6+%

GF05438066

Titanium, tube, 1000mm, outside diameter 1.6mm, inside diameter 1.2mm, wall thickness 0.2mm, hard, 99.6+%

GF29391329

Titanium, tube, 1000mm, outside diameter 6.35mm, inside diameter 5.53mm, wall thickness 0.41mm, annealed, 99.6+%

GF54978249

Titanium, rod, 200mm, diameter 4mm, annealed, 99.6+%

GF72503827

Titanium, tube, 100mm, outside diameter 2.03mm, inside diameter 1.63mm, wall thickness 0.2mm, annealed, 99.6+%

GF34106363

Titanium, rod, 1000mm, diameter 1.5mm, annealed, 99.6+%