Skip to Content
Merck
CN
  • Simultaneous determination of major type B trichothecenes and deoxynivalenol-3-glucoside in animal feed and raw materials using improved DSPE combined with LC-MS/MS.

Simultaneous determination of major type B trichothecenes and deoxynivalenol-3-glucoside in animal feed and raw materials using improved DSPE combined with LC-MS/MS.

Journal of chromatography. B, Analytical technologies in the biomedical and life sciences (2014-06-18)
Zhiyong Zhao, Qinxiong Rao, Suquan Song, Na Liu, Zheng Han, Jiafa Hou, Aibo Wu
ABSTRACT

A simple and reliable method for simultaneous determination of deoxynivalenol-3-glucoside and major type B trichothecenes (deoxynivalenol, nivalenol, fusarenon X, 3-acetyldeoxynivalenol, 15-acetyldeoxynivalenol and deepoxy-deoxynivalenol) in animal feed and raw materials has been developed and validated in this study. The method was based on an improved dispersive solid-phase extraction (DSPE) followed by analysis using high performance liquid chromatography coupled to tandem mass spectrometry (HPLC-MS/MS). Also, matrix-matched calibration curve (R(2)>0.99) was employed to minimize matrix effects and ensure accurate quantification. The recoveries during sample preparation process (including extraction and clean-up) ranged from 79.03% to 118.39%, with intra-day and inter-day relative standard deviation lower than 20% for all the analytes. The limit of quantification ranged from 5.0 μg/kg for deoxynivalenol to 13.6 μg/kg for fusarenon X. The validated method was successfully applied to the analysis of animal feed and corn. The pilot study showed that 37 out of 41 samples were contaminated with deoxynivalenol-3-glucoside at the levels of 6.0-121.0 μg/kg. Most of the type B trichothecenes were also found with the exception of fusarenon X, at the contaminated levels of 10.0-1,382 μg/kg. To the best of our knowledge, this was the first scientific report on the co-occurrence of masked deoxynivalenol and type B trichothecenes in animal feed and raw materials.

MATERIALS
Product Number
Brand
Product Description

Supelco
Methanol, analytical standard
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Sigma-Aldrich
Methanol, purification grade, 99.8%
Sigma-Aldrich
Methanol, suitable for NMR (reference standard)
Sigma-Aldrich
Methanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Methanol, suitable for HPLC, ≥99.9%
Supelco
Residual Solvent - Acetonitrile(solution in DMSO), Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Methanol, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Acetonitrile(Neat), Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Methanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Methanol, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Methanol, puriss., meets analytical specification of Ph Eur, ≥99.7% (GC)
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Methanol, BioReagent, ≥99.93%
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Methanol solution, contains 0.50 % (v/v) triethylamine
Sigma-Aldrich
Methanol solution, suitable for NMR (reference standard), 4% in methanol-d4 (99.8 atom % D), NMR tube size 3 mm × 8 in.
USP
Methyl alcohol, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Acetonitrile, Preparateur, ≥99.9% (GC), One-time steel-plastic (SP) drum
Supelco
Acetonitrile, analytical standard
Sigma-Aldrich
Acetonitrile, anhydrous, 99.8%
Sigma-Aldrich
Acetonitrile, suitable for HPLC-GC, ≥99.8% (GC)
Sigma-Aldrich
Acetonitrile, electronic grade, 99.999% trace metals basis
Sigma-Aldrich
Acetonitrile, ReagentPlus®, 99%
Sigma-Aldrich
Acetonitrile, ACS reagent, ≥99.5%
Sigma-Aldrich
Acetonitrile, suitable for DNA synthesis, ≥99.9% (GC)