Skip to Content
Merck
CN
  • Two-steps extraction of essential oil, polysaccharides and biphenyl cyclooctene lignans from Schisandra chinensis Baill fruits.

Two-steps extraction of essential oil, polysaccharides and biphenyl cyclooctene lignans from Schisandra chinensis Baill fruits.

Journal of pharmaceutical and biomedical analysis (2014-04-24)
Zhenyu Cheng, Yingjie Yang, Yan Liu, Zhigang Liu, Hongli Zhou, Haobin Hu
ABSTRACT

A method for two-steps extraction of essential oil, polysaccharides and lignans from Schisandra chinensis Baill had been established. Firstly, S. chinensis was extracted by hydro-distillation, the extracted solution was separated from the water-insoluble residue and precipitated by adding dehydrated alcohol after the essential oil was collected, and then the precipitate as polysaccharide was collected. Finally, second extraction was performed to obtained lignans from the water-insoluble residue with ultrasonic-microwave assisted extraction (UMAE) method. Response surface methodology was employed to optimize the UMAE parameters, the optimal conditions were as follows: microwave power 430W, ethanol concentration 84%, particle size of sample 120-mesh sieves, ratio of water to raw material 15 and extraction time 2.1min. Under these optimized conditions, the total extraction yields of five lignans (Schisandrol A, Schisantherin A, Deoxyschisandrin, Schisandrin B and Schisandrin C) had reached 14.22±0.135mg/g. Compared with the traditional method of direct extraction of different bioactive components in respective procedure, the extraction yields of polysaccharides and the five lignans had reached 99% and 95%, respectively. The mean recoveries of the 5 lignan compounds and polysaccharides were 97.75-101.08% and their RSD value was less than 3.88%.The approach proposed in this study not only improved the extraction yield of lignans, but also elevated the utilization of Schisandra resources.

MATERIALS
Product Number
Brand
Product Description

Supelco
Acetonitrile(Neat), Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Residual Solvent - Acetonitrile(solution in DMSO), Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Liquified Phenol, ≥89.0%
Supelco
Phenol solution, 5000 μg/mL in methanol, certified reference material
Supelco
Phenol solution, certified reference material, 500 μg/mL in methanol
Supelco
Phenol solution, 100 μg/mL in acetonitrile, PESTANAL®, analytical standard
Sigma-Aldrich
Phenol solution, Saturated with 0.01 M citrate buffer, pH 4.3 ± 0.2, BioReagent, Molecular Biology
Sigma-Aldrich
Acetonitrile, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Acetonitrile, ReagentPlus®, 99%
Sigma-Aldrich
Acetonitrile, ACS reagent, ≥99.5%
Sigma-Aldrich
Acetonitrile, suitable for HPLC, gradient grade, ≥99.9%
USP
Phenol, United States Pharmacopeia (USP) Reference Standard
USP
Residual Solvent Class 2 - Acetonitrile, United States Pharmacopeia (USP) Reference Standard
Supelco
Phenol, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Acetonitrile, anhydrous, 99.8%
Sigma-Aldrich
Phenol solution, Equilibrated with 10 mM Tris HCl, pH 8.0, 1 mM EDTA, BioReagent, Molecular Biology
Sigma-Aldrich
Acetonitrile, suitable for HPLC-GC, ≥99.8% (GC)
Sigma-Aldrich
Acetonitrile, ≥99.5% (GC)
Supelco
Acetonitrile, analytical standard
Sigma-Aldrich
Acetonitrile, ≥99.9% (GC)
Sigma-Aldrich
Acetonitrile, biotech. grade, ≥99.93%
Sigma-Aldrich
Acetonitrile, electronic grade, 99.999% trace metals basis
Sigma-Aldrich
Phenol, ≥99%
Sigma-Aldrich
Phenol, ACS reagent, ≥99.0%
Sigma-Aldrich
Phenol, puriss. p.a., ACS reagent, reag. Ph. Eur., 99.0-100.5%
Sigma-Aldrich
Phenol, puriss., ≥99.5% (GC), meets analytical specification of Ph. Eur., BP, USP, crystalline (detached)
Sigma-Aldrich
Phenol, ≥96.0% (calc. on dry substance, T)
Sigma-Aldrich
Phenol, puriss., meets analytical specification of Ph. Eur., BP, USP, 99.5-100.5% (GC)
Supelco
Phenol, PESTANAL®, analytical standard
Sigma-Aldrich
Phenol, unstabilized, ReagentPlus®, ≥99%