Skip to Content
Merck
CN
  • Storage effect on the analysis of pharmaceuticals and personal care products in wastewater.

Storage effect on the analysis of pharmaceuticals and personal care products in wastewater.

Chemosphere (2014-07-07)
Ganna Fedorova, Oksana Golovko, Tomas Randak, Roman Grabic
ABSTRACT

In this study, the stability of 124 target analytes in influent and effluent wastewater samples during short-term (4°C) and long-term (-18°C) storage was assessed. The most common storage scenario was considered, in which samples were frozen immediately after sampling without any pre-treatment. During short-term storage more analytes remained stable (concentration during storage was in the range of 60-120% of the initial concentration) at 4°C than at -18°C. During long-term storage (-18°C), three types of behavior were observed: constant concentrations throughout the experimental period, decreasing concentrations with time, and loss of the compound from the sample after freezing. Differences between effluent and influent samples were observed for 50 out of 124 tested PPCPs. The amount of stable analytes decreased with time during long-term storage. 72% and 56% of the target compounds in the effluent and influent wastewater, respectively, remained stable during 60days of storage. The number of stable compounds decreased to 57 (46%) and 46 (37%) in the effluent and influent, respectively, over 120days. 15 Pharmaceuticals were lost after freezing/thawing cycle. The results stress the importance of storage factors during analysis of pharmaceuticals in wastewater. The stability of target compounds in the samples under the planned storage conditions should be checked before starting the experiment to obtain reliable data.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Trimethoprim, ≥98.5%
Sigma-Aldrich
Carbamazepine, meets USP testing specifications
Sigma-Aldrich
Trimethoprim, ≥99.0% (HPLC)
Supelco
Trimethoprim, VETRANAL®, analytical standard
Carbamazepine, European Pharmacopoeia (EP) Reference Standard
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, ≥99.9%
Supelco
Methanol, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Methanol, analytical standard
Supelco
Carbamazepine, Pharmaceutical Secondary Standard; Certified Reference Material
USP
Carbamazepine, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Supelco
Acetonitrile(Neat), Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Supelco
Trimethoprim, Pharmaceutical Secondary Standard; Certified Reference Material
USP
Trimethoprim, United States Pharmacopeia (USP) Reference Standard
Supelco
Residual Solvent - Acetonitrile(solution in DMSO), Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Methanol, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Methanol, BioReagent, ≥99.93%
Sigma-Aldrich
Methanol, puriss., meets analytical specification of Ph Eur, ≥99.7% (GC)
Sigma-Aldrich
Methanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Methanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
Methanol, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Methanol, purification grade, 99.8%
Sigma-Aldrich
Methanol, suitable for NMR (reference standard)
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Trimethoprim, European Pharmacopoeia (EP) Reference Standard
Supelco
Carbamazepine, analytical standard