Skip to Content
Merck
CN
  • Development of a multi-toxin method for investigating the carryover of zearalenone, deoxynivalenol and their metabolites into milk of dairy cows.

Development of a multi-toxin method for investigating the carryover of zearalenone, deoxynivalenol and their metabolites into milk of dairy cows.

Food additives & contaminants. Part A, Chemistry, analysis, control, exposure & risk assessment (2015-04-08)
Janine Winkler, Susanne Kersten, Hana Valenta, Ulrich Meyer, Ulrich H Engelhardt, Sven Dänicke
ABSTRACT

A dose-response study was carried out to examine the carryover of zearalenone (ZEN), deoxynivalenol (DON) and their metabolites into bovine milk. Therefore, a feeding trial with 30 dairy cows fed with three different levels of Fusarium (FUS) toxin-contaminated maize was performed. A control group (0.02 mg ZEN kg(-1) dry matter (DM) and 0.07 DON kg(-1) DM) was compared with two groups fed contaminated diets. The first diet contained 0.33 mg ZEN kg(-1) DM and 2.62 mg DON kg(-1) DM (group FUS-50) and the second diet contained 0.66 mg ZEN kg(-1) DM and 5.24 mg DON kg(-1) DM (group FUS-100). For milk sample analysis, a new cost-efficient sample preparation method was developed for the simultaneous determination of ZEN, DON and their metabolites. The method comprised the separation of the milk fat followed by an SPE clean-up on Oasis HLB and a LC-MS/MS measurement. The less toxic metabolite de-epoxy-DON had the highest detected concentration (5.6 ng ml(-1) milk) in the milk samples obtained from the feeding trial. Additionally, ZEN (up to 0.29 ng ml(-1)), α-zearalenol (up to 0.17 ng ml(-1)), β-zearalenol (up to 0.95 ng ml(-1)) and DON (up to 2.5 ng ml(-1)) were detected in these samples. The milk toxin concentrations of cows fed the control diet were significantly lower compared with cows fed the contaminated diet. The calculated carryover rates ranged between 0 and 0.0075 for ZEN and metabolites and between 0 and 0.0017 for DON independent of exposure. It can be concluded that dietary toxin concentrations in the feed below or close to the current guidance values do not pose a risk for consumers due to negligible carryover rates.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Sodium hydroxide, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Sodium hydroxide, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Sodium hydroxide, ultra dry, powder or crystals, 99.99% trace metals basis
Sigma-Aldrich
Sodium hydroxide, puriss. p.a., ACS reagent, reag. Ph. Eur., K ≤0.02%, ≥98%, pellets
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Sodium hydroxide, beads, 16-60 mesh, reagent grade, 97%
Sigma-Aldrich
Methanol, suitable for NMR (reference standard)
Sigma-Aldrich
Methanol, purification grade, 99.8%
Sigma-Aldrich
Zearalanone
Sigma-Aldrich
3-Ethyl-2,4-pentanedione, mixture of tautomers, 98%
Sigma-Aldrich
Methanol, puriss., meets analytical specification of Ph Eur, ≥99.7% (GC)
Sigma-Aldrich
Methanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Sodium hydroxide solution, purum, ≥32%
Sigma-Aldrich
Sodium hydroxide solution, 50% in H2O
Sigma-Aldrich
Sodium hydroxide, reagent grade, 97%, powder
Sigma-Aldrich
Sodium hydroxide, puriss. p.a., ACS reagent, K ≤0.02%, ≥98.0% (T), pellets
Sigma-Aldrich
Sodium hydroxide solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Sodium hydroxide solution, BioUltra, Molecular Biology, 10 M in H2O
Sigma-Aldrich
Sodium hydroxide, anhydrous, free-flowing, Redi-Dri, reagent grade, ≥98%, pellets
Sigma-Aldrich
Zirconyl chloride octahydrate, reagent grade, 98%
Sigma-Aldrich
Sodium hydroxide solution, 5.0 M
Sigma-Aldrich
Sodium hydroxide, ACS reagent, ≥97.0%, pellets
Supelco
Sodium hydroxide concentrate, 0.1 M NaOH in water (0.1N), Eluent concentrate for IC
Sigma-Aldrich
Sodium hydroxide, BioUltra, suitable for luminescence, ≥98.0% (T), pellets
Supelco
Sodium hydroxide solution, 49-51% in water, eluent for IC
Sigma-Aldrich
Sodium hydroxide, reagent grade, ≥98%, pellets (anhydrous)