Skip to Content
Merck
CN
  • Isolation and characterization of feruloylated arabinoxylan oligosaccharides from the perennial cereal grain intermediate wheat grass (Thinopyrum intermedium).

Isolation and characterization of feruloylated arabinoxylan oligosaccharides from the perennial cereal grain intermediate wheat grass (Thinopyrum intermedium).

Carbohydrate research (2015-02-24)
Rachel R Schendel, Andreas Becker, Catrin E Tyl, Mirko Bunzel
ABSTRACT

In comparison to the annual grain crops dominating current agricultural production, perennial grain species require fewer chemical and energy inputs and improve soil health and erosion control. The possibility for producing sustainable grain harvests from marginal land areas is motivating research initiatives to integrate perennial grains into commercial cropping and food processing systems. In this study, the feruloylated arabinoxylans from intermediate wheat grass (Thinopyrum intermedium, IWG), a promising perennial grain candidate in agronomic screening studies, were investigated. Insoluble fiber isolated from IWG whole grain flour was subjected to either mildly acidic (50 mM TFA, 100 °C, 2 h) or enzymatic (Driselase) hydrolysis. The liberated feruloylated arabinoxylan oligosaccharides were concentrated with Amberlite XAD-2, separated with gel chromatography (Sephadex LH-20, water), and purified with reversed-phase HPLC (C18, water-MeOH gradient). Thirteen feruloylated oligosaccharides were isolated (including eight structures described for the first time) and identified by LC-ESI-MS and NMR. Linkage-type analysis via methylation analysis, as well as the monosaccharide and phenolic acid profiles of the IWG insoluble fiber were also determined. IWG feruloylated arabinoxylans have a relatively simple structure with only short feruloylated side chains, a lower backbone substitution rate than annual rye and wheat varieties, and a moderate phenolic acid content.

MATERIALS
Product Number
Brand
Product Description

Supelco
Sodium hydroxide concentrate, 0.1 M NaOH in water (0.1N), Eluent concentrate for IC
Sigma-Aldrich
1-Methylimidazole, ReagentPlus®, 99%
Sigma-Aldrich
1-Methylimidazole, ≥99%, purified by redistillation
Sigma-Aldrich
Sodium Acetate Anhydrous, >99%, FG
Sigma-Aldrich
Sodium acetate, 99.995% trace metals basis
Supelco
Sinapic acid, suitable for matrix substance for MALDI-MS, ≥99.0% (T)
Sigma-Aldrich
Sodium acetate solution, BioUltra, Molecular Biology, ~3 M in H2O
Sigma-Aldrich
Sodium hydroxide, BioUltra, suitable for luminescence, ≥98.0% (T), pellets
Supelco
Sodium hydroxide solution, 49-51% in water, eluent for IC
Sigma-Aldrich
Sodium hydroxide solution, BioUltra, Molecular Biology, 10 M in H2O
Sigma-Aldrich
Iodomethane, contains copper as stabilizer, ReagentPlus®, 99%
Sigma-Aldrich
3-Ethyl-2,4-pentanedione, mixture of tautomers, 98%
Sigma-Aldrich
Sinapic acid, ≥98%, powder
Sigma-Aldrich
Sodium acetate, anhydrous, Molecular Biology, ≥99%
Sigma-Aldrich
Sodium acetate, powder, BioReagent, suitable for electrophoresis, suitable for cell culture, suitable for insect cell culture, ≥99%
Sigma-Aldrich
Sodium acetate, meets USP testing specifications, anhydrous
Sigma-Aldrich
Sodium acetate, BioXtra, ≥99.0%
Sigma-Aldrich
p-Coumaric acid, ≥98.0% (HPLC)
Supelco
Sinapic acid, suitable for matrix substance for MALDI-MS, ≥99.5%, Ultra pure
Sigma-Aldrich
Sodium hydroxide, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Sodium acetate, puriss. p.a., ACS reagent, reag. Ph. Eur., anhydrous
Sigma-Aldrich
Sodium acetate, anhydrous, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Sodium acetate, anhydrous, BioUltra, suitable for luminescence, Molecular Biology, ≥99.0% (NT)
Sigma-Aldrich
Sodium hydroxide solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Sodium hydroxide, reagent grade, 97%, powder
Sigma-Aldrich
Sodium hydroxide, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Sodium hydroxide solution, purum, ≥32%
Sigma-Aldrich
Sodium hydroxide, puriss. p.a., ACS reagent, K ≤0.02%, ≥98.0% (T), pellets
Sigma-Aldrich
Sodium hydroxide solution, 5.0 M
Sigma-Aldrich
Sodium hydroxide, anhydrous, free-flowing, Redi-Dri, reagent grade, ≥98%, pellets