Skip to Content
Merck
CN
  • Simultaneous separation of acidic and basic proteins using gemini pyrrolidinium surfactants and hexafluoroisopropanol as dynamic coating additives in capillary electrophoresis.

Simultaneous separation of acidic and basic proteins using gemini pyrrolidinium surfactants and hexafluoroisopropanol as dynamic coating additives in capillary electrophoresis.

Journal of chromatography. A (2015-08-25)
Yu Tian, Yunfang Li, Jie Mei, Bo Cai, Jinfeng Dong, Zhiguo Shi, Yuxiu Xiao
ABSTRACT

The separation of acidic and basic proteins using CE has been limited in part due to the adsorption of proteins onto the capillary wall. In this work, the efficient control of EOF and the simultaneous separation of acidic and basic proteins are achieved by use of C18-4-C18PB as a dynamic coating additive, which is a representative surfactant for 1,1'-(butane-1,s-alkyl)bis(1-alkylpyrrolidinium) bromide (Cn-4-CnPB, n=10, 12, 14, 16 and 18). C18-4-C18PB exhibits a powerful capability in the reversal of EOF, and a low concentration even less than 0.001 mM is sufficient to reverse EOF at the tested pH values (3.0-9.0). Baseline separation of eight proteins with sharp peaks and high efficiencies (54,000-297,000 plates/m) is obtained with 30 mM NaH2PO4 buffer (pH 5.0) containing 4 mM C18-4-C18PB. At the same buffer condition, the Cn-4-CnPB with shorter alkyl chain (n=10, 12, 14, 16) cannot achieve the same effective protein separation as C18-4-C18PB. However, the combined use of small amounts (≤0.5%, v/v) of hexafluoroisopropanol (HFIP) and Cn-4-CnPB (n=10, 12, 14, 16) as additives can completely separate all eight proteins with high efficiencies of 81,000-318,000 plates/m. The RSDs of migration time are less than 0.80% and 5.84% for run-to-run and day-to-day assays (n=5), respectively, and the protein recoveries are larger than 90.15%. To the best of our knowledge, this is the first report on the simultaneous separation of acidic and basic proteins using Cn-4-CnPB surfactants or Cn-4-CnPB surfactants combined with HFIP as dynamic coating additives.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Sodium phosphate monobasic-16O4, 99.9 atom % 16O
Sigma-Aldrich
N,N-Dimethylformamide, anhydrous, 99.8%
Sigma-Aldrich
Sodium hydroxide solution, BioUltra, Molecular Biology, 10 M in H2O
Sigma-Aldrich
3-Ethyl-2,4-pentanedione, mixture of tautomers, 98%
Sigma-Aldrich
N,N-Dimethylformamide, Molecular Biology, ≥99%
Sigma-Aldrich
Sodium hydroxide, BioUltra, suitable for luminescence, ≥98.0% (T), pellets
Sigma-Aldrich
Sodium hydroxide solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Sodium hydroxide, ultra dry, powder or crystals, 99.99% trace metals basis
Sigma-Aldrich
Sodium hydroxide-16O solution, 20 wt. % in H216O, 99.9 atom % 16O
Sigma-Aldrich
Sodium phosphate monobasic solution, BioUltra, 5 M in H2O
Sigma-Aldrich
Sodium phosphate monobasic, meets USP testing specifications, anhydrous
Sigma-Aldrich
Sodium phosphate monobasic, BioXtra, ≥99.0%
Sigma-Aldrich
Sodium phosphate monobasic, ReagentPlus®, ≥99.0%
Sigma-Aldrich
Sodium phosphate monobasic, BioPerformance Certified, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥99.0% (titration)
Sigma-Aldrich
Sodium phosphate monobasic, BioReagent, Molecular Biology, anhydrous, ≥98%
Sigma-Aldrich
Sodium phosphate monobasic, anhydrous, free-flowing, Redi-Dri, ≥99.0%
Sigma-Aldrich
Sodium phosphate monobasic, Vetec, reagent grade, 99%