Skip to Content
Merck
CN
  • Development of a Method for the Quantitation of Three Thiols in Beer, Hop, and Wort Samples by Stir Bar Sorptive Extraction with in Situ Derivatization and Thermal Desorption-Gas Chromatography-Tandem Mass Spectrometry.

Development of a Method for the Quantitation of Three Thiols in Beer, Hop, and Wort Samples by Stir Bar Sorptive Extraction with in Situ Derivatization and Thermal Desorption-Gas Chromatography-Tandem Mass Spectrometry.

Journal of agricultural and food chemistry (2015-07-15)
Nobuo Ochiai, Kikuo Sasamoto, Toru Kishimoto
ABSTRACT

A method for analysis of hop-derived polyfunctional thiols, such as 4-sulfanyl-4-methylpentan-2-one (4S4M2Pone), 3-sulfanylhexan-1-ol (3SHol), and 3-sulfanylhexyl acetate (3SHA), in beer, hop water extract, and wort at nanogram per liter levels was developed. The method employed stir bar sorptive extraction with in situ derivatization (der-SBSE) using ethyl propiolate (ETP), followed by thermal desorption and gas chromatography-tandem mass spectrometry (TD-GC-MS/MS) with selected reaction monitoring (SRM) mode. A prior step involved structural identification of the ETP derivatives of the thiols by TD-GC-quadrupole-time-of-flight mass spectrometry with parallel sulfur chemiluminescence detection (Q-TOF-MS/SCD) after similar der-SBSE. The der-SBSE conditions of the ETP concentration, buffer concentration, salt addition, and extraction time profiles were investigated, and the performance of the method was demonstrated with spiked beer samples. The limits of detection (LODs) (0.19-27 ng/L) are below the odor threshold levels of all analytes. The apparent recoveries at 10-100 ng/L (99-101%) and the repeatabilities [relative standard deviation (RSD) of 1.3-7.2%; n = 6] are also good. The method was successfully applied to the determination of target thiols at nanogram per liter levels in three kinds of beer samples (hopped with Cascade, Citra, and Nelson Sauvin) and the corresponding hop water extracts and wort samples. There was a clear correlation between the determined values and the characteristics of citrus hop aroma for each sample.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Carbon, mesoporous
Sigma-Aldrich
Carbon, mesoporous, nanopowder, less than 500 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
Heptacosafluorotributylamine, liquid
Supelco
Ethanol standards 10% (v/v), 10 % (v/v) in H2O, analytical standard
Sigma-Aldrich
Carbon, mesoporous, nanopowder, graphitized, less than 250 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
Ethanol Fixative 80% v/v, suitable for fixing solution (blood films)
Sigma-Aldrich
Carbon, mesoporous, less than 100 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
Sodium hydroxide solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Sodium hydroxide solution, BioUltra, Molecular Biology, 10 M in H2O
Sigma-Aldrich
Sodium hydroxide, BioUltra, suitable for luminescence, ≥98.0% (T), pellets
Sigma-Aldrich
3-Ethyl-2,4-pentanedione, mixture of tautomers, 98%
Sigma-Aldrich
Sodium hydroxide, ultra dry, powder or crystals, 99.99% trace metals basis
Sigma-Aldrich
Sodium hydroxide-16O solution, 20 wt. % in H216O, 99.9 atom % 16O
Sigma-Aldrich
Methane-12C, 13C-depleted, 99.99 atom % 12C
Sigma-Aldrich
Ethyl alcohol, Pure, 190 proof, meets USP testing specifications
Sigma-Aldrich
Ethyl alcohol, Pure, 190 proof, ACS reagent, meets USP testing specifications, Excise Tax-free, Permit for use required
Sigma-Aldrich
Ethyl alcohol, Pure, 200 proof, ACS reagent, meets USP testing specifications, Excise Tax-free, Permit for use required
Sigma-Aldrich
Ethyl alcohol, Pure, 200 proof, anhydrous, ≥99.5%
Sigma-Aldrich
Ethyl alcohol, Pure, 190 proof, ACS spectrophotometric grade, 95.0%
Carbon - Vitreous, rod, 200mm, diameter 1.0mm, glassy carbon
Carbon - Vitreous, foil, 100x100mm, thickness 1.0mm, glassy carbon
Carbon - Vitreous, rod, 100mm, diameter 1.0mm, glassy carbon
Sigma-Aldrich
Methylamine hydrochloride, ≥98%
Carbon - Vitreous, tube, 50mm, outside diameter 10mm, inside diameter 3mm, wall thickness 3.5mm, glassy carbon
Carbon - Vitreous, rod, 100mm, diameter 7.0mm, glassy carbon
Carbon - Vitreous, tube, 100mm, outside diameter 10mm, inside diameter 3mm, wall thickness 3.5mm, glassy carbon
Carbon - Vitreous, foil, 50x50mm, thickness 4.0mm, glassy carbon
Carbon - Vitreous, foil, 100x100mm, thickness 2.0mm, glassy carbon
Carbon - Vitreous, foil, 100x100mm, thickness 6.0mm, glassy carbon
Carbon - Vitreous, foil, 10x10mm, thickness 1.0mm, glassy carbon