产品名称
Clarisolve 40 µm 实验室级深层过滤器,0.014 m2 (0.15 ft2), High-density cell cultures
material
Millistak+® media
TPE seal
polypropylene
manufacturer/tradename
Clarisolve®
parameter
2.1 bar max. differential pressure (30 psid) at 37 °C (Forward)
2.1 bar max. differential pressure (30 psid) at 37 °C (Maximum)
2.1 bar max. differential pressure (30 psid) at 37 °C (Reverse)
2.1 bar max. differential pressure (30 psid) at 4 °C (Forward)
H
14 cm (5.3 in.)
L
22 cm (8.5 in.)
W
7.4 cm (2.9 in.)
filtration area
0.014 m2
impurities
<0.25 EU/mL (LAL test, Aqueous extraction; on filter media only)
total organic carbon (TOC) residue
0.9-1.2 μg/L
input
sample type liquid
conductivity
0.91 – 1.29 μS/cm
shipped in
ambient
Quality Level
Analysis Note
总有机碳(TOC)残留量:60HX 介质的 TOC 测量值低于可检测的极限。
总有机碳(TOC)残留量:后高压灭菌(123 °C,1 个循环,每次 60 分钟),并以流量为 600 LMH 的净水冲洗 10 分钟。冲洗结束时,抽取样品获取 TOC 典型值。
General description
产品的水电导率;高压灭菌后(1个周期,123 °C,60分钟 ),以600 LMH的流量冲洗纯水,冲洗10分钟。冲洗过程中,每2分钟抽取滤液样品并测试其电导率。
Legal Information
CLARISOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, Germany
存储类别
13 - Non Combustible Solids
wgk
nwg
flash_point_f
Not applicable
flash_point_c
Not applicable
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持