CWLS71S03
Milligard® LPB 0.5/0.2 µm nominal, Cartridge
pore size 0.5/0.2 μm, cartridge nominal length 10 in. (25 cm)
Synonym(s):
Milligard Low Protein Binding Cartridge Filter 10 in. Code 7 0.2 μm
Select a Size
About This Item
Recommended Products
material
mixed cellulose esters (MCE) (low protein-binding)
polyester support
polypropylene
silicone seal
Quality Level
sterility
non-sterile
Sterilization Compatibility
autoclavable compatible
steam-in-place compatible
product line
Milligard®
feature
hydrophilic
manufacturer/tradename
Milligard®
parameter
3.5 bar max. differential pressure (50 psid) at 25 °C
3.5 bar max. inlet pressure (50 psi) at 25 °C
technique(s)
prefiltration: suitable
L
10 in.
Looking for similar products? Visit Product Comparison Guide
1 of 4
This Item | CWLC71S03 | CWL671S03 | CWL971S03 |
|---|---|---|---|
| pore size 0.5/0.2 μm nominal pore size, 0.5/0.2 μm pore size | pore size 1.2/0.5 μm nominal pore size, 1.2/0.5 μm pore size | pore size - | pore size - |
| technique(s) prefiltration: suitable | technique(s) prefiltration: suitable | technique(s) prefiltration: suitable | technique(s) prefiltration: suitable |
| filtration area 0.7 m2 | filtration area 0.7 m2 | filtration area 0.8 m2 | filtration area 0.8 m2 |
| product line Milligard® | product line Milligard® | product line Milligard® | product line Milligard® |
| material mixed cellulose esters (MCE) (low protein-binding), polypropylene , polyester support, silicone seal | material mixed cellulose esters (MCE) (low protein-binding), polyester support, polypropylene , silicone seal | material mixed cellulose esters (MCE) (low protein-binding), polyester support, polypropylene , silicone seal | material mixed cellulose esters (MCE) (low protein-binding), polyester support, polypropylene , silicone seal |
| manufacturer/tradename Milligard® | manufacturer/tradename Milligard® | manufacturer/tradename Milligard® | manufacturer/tradename Milligard® |
General description
Features and Benefits
Packaging
Preparation Note
10 autoclave cycles or SIP @ 121 °C for 30 min
Analysis Note
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer to the installation and wetting sections of OptiScale®-25 user guide and introduction section of the Mixed cellulose esters Tech Brief
- Storage Statement: Please refer to the Mixed cellulose esters Tech Brief
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
Signal Word
Danger
Hazard Statements
Precautionary Statements
Hazard Classifications
Flam. Sol. 1
Storage Class Code
4.1B - Flammable solid hazardous materials
WGK
WGK 2
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service