Skip to Content
Merck
CN
  • Evaluation of an electrochemical method for the analysis of enzymatic inhibition reactions.

Evaluation of an electrochemical method for the analysis of enzymatic inhibition reactions.

Analytical sciences : the international journal of the Japan Society for Analytical Chemistry (2013-01-11)
Kohei Uematsu, Hajime Katano
ABSTRACT

An approximate equation for bioelectrocatalitic current was applied to an inhibition reaction analysis of bilirubin oxidase by anion (Cl(-), SCN(-), and F(-)) in order to assess the possibility of the electrochemical method for the analysis of enzymatic inhibition reactions. The approximate equation can be transformed into the Michaelis-Menten form, so that the bioelectrocatalitic current can be analyzed by the usual graphical manner, that is, Lineweaver-Burk, Hanes-Woolf, Dixon and Cornish-Bowden plots, if the rate of inhibition reaction is described as a simple Michaelis-Menten form. From the electrochemical assay, it was found that the inhibitor of Cl(-) and SCN(-) anions exhibit non-competitive inhibition while that of F(-) exhibits competitive inhibition, and their inhibition constants were 220, 45, and 22 mM, respectively. The results were essentially similar to those obtained from the conventional spectrophotometric assay.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Bilirubin Oxidase from Myrothecium verrucaria, lyophilized powder, 15-65 units/mg protein
Supelco
Fluoride ion solution for ISE, 0.1 M F-, for ion-selective electrodes
Sigma-Aldrich
Sodium thiocyanate, ≥99.99% trace metals basis
Sigma-Aldrich
Sodium fluoride, 99.99% trace metals basis
Sigma-Aldrich
Sodium fluoride, BioReagent, suitable for insect cell culture, ≥99%
Sigma-Aldrich
Sodium fluoride, BioXtra, ≥99%
Sigma-Aldrich
Sodium fluoride, anhydrous, powder, 99.99% trace metals basis
Sigma-Aldrich
Sodium thiocyanate solution, BioUltra, 8 M in H2O
Sigma-Aldrich
Sodium fluoride 0.5 M solution
Sigma-Aldrich
Sodium thiocyanate, ACS reagent, ≥98.0%
Sigma-Aldrich
Sodium thiocyanate, reagent grade, 98-102% (titration)
Sigma-Aldrich
Sodium fluoride, ACS reagent, ≥99%
Sigma-Aldrich
Sodium fluoride, puriss., meets analytical specification of Ph. Eur., BP, USP, 98.5-100.5% (calc. to the dried substance)
Sigma-Aldrich
Sodium fluoride, ReagentPlus®, ≥99%