Merck
CN
  • Evaluation of degradation kinetics and physicochemical stability of tenofovir.

Evaluation of degradation kinetics and physicochemical stability of tenofovir.

Drug testing and analysis (2014-05-13)
Vivek Agrahari, Sandeep Putty, Christiane Mathes, James B Murowchick, Bi-Botti C Youan
ABSTRACT

Tenofovir (TFV) has been proven to prevent the transmission of the Human Immunodeficiency Virus (HIV) through the vagina. But, there is little information available about its stability under various storage and stress conditions. Hence, this study aimed to investigate the degradation behavior and physicochemical stability of TFV using liquid chromatography coupled mass spectrometry (LC-MS) and solid state X-ray diffraction (XRD) analyses. The LC-MS analysis was performed on a QTrap mass spectrometer with an enhanced mass spectrum (EMS) scan in positive mode. A reversed phase C18 column was used as the stationary phase. TFV exhibited degradation under acidic and alkaline hydrolytic conditions. The degradation products with m/z 289.2 and 170 amu have been proposed as 6-Hydroxy adenine derivative of TFV, and (2-hydroxypropan-2-yloxy) methylphosphonic acid, respectively. A pseudo-first-order degradation kinetic allowed for estimating the shelf-life, half-life, and time required for 90% degradation of 3.84, 25.34, and 84.22 h in acidic conditions, and 58.26, 384.49, and 1277.75 h in alkaline conditions, respectively. No significant degradation was observed at pH 4.5 (normal cervicovaginal pH) and oxidative stress conditions of 3% and 30% v/v hydrogen peroxide solutions. The shelf life of TFV powder at room temperature was 23 months as calculated by using an Arrhenius plot. The XRD pattern showed that the drug was stable and maintained its original crystallinity under the accelerated and thermal stress conditions applied. Stability analyses revealed that the TFV was stable in various stress conditions; however, formulation strategies should be implemented to protect it in strong acidic and alkaline environments.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Sodium hydroxide, reagent grade, 97%, flakes
Supelco
Residual Solvent - Acetonitrile, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Sodium hydroxide, ultra dry, powder or crystals, 99.99% trace metals basis
Sigma-Aldrich
Sodium hydroxide, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
Hydrochloric acid, meets analytical specification of Ph. Eur., BP, NF, fuming, 36.5-38%
Sigma-Aldrich
Sodium hydroxide, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
Sodium hydroxide, puriss. p.a., ACS reagent, K ≤0.02%, ≥98.0% (T), pellets
Sigma-Aldrich
Sodium hydroxide, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
Sodium hydroxide, puriss. p.a., ACS reagent, reag. Ph. Eur., K ≤0.02%, ≥98%, pellets
Sigma-Aldrich
Hydrochloric acid, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., fuming, ≥37%, APHA: ≤10
Sigma-Aldrich
Sodium hydroxide, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
Sodium hydroxide, pellets, semiconductor grade, 99.99% trace metals basis
Sigma-Aldrich
Sodium hydroxide, reagent grade, 97%, powder
Sigma-Aldrich
Hydrochloric acid, ACS reagent, 37%
Sigma-Aldrich
Hydrogen peroxide solution, contains ~200 ppm acetanilide as stabilizer, 3 wt. % in H2O
Sigma-Aldrich
Sodium hydroxide, beads, 16-60 mesh, reagent grade, 97%
Sigma-Aldrich
Hydrogen peroxide solution, contains inhibitor, 35 wt. % in H2O
Sigma-Aldrich
Sodium hydroxide, anhydrous, free-flowing, Redi-Dri, reagent grade, ≥98%, pellets
Millipore
Hydrogen peroxide solution, 3%, suitable for microbiology
Sigma-Aldrich
3-Ethyl-2,4-pentanedione, mixture of tautomers, 98%
Sigma-Aldrich
Sodium hydroxide, BioUltra, for luminescence, ≥98.0% (T), pellets
Sigma-Aldrich
Hydrogen peroxide solution, 34.5-36.5%
Sigma-Aldrich
Hydrochloric acid, 36.5-38.0%, BioReagent, for molecular biology
Supelco
Hydrochloric acid solution, volumetric, 0.1 M HCl (0.1N), endotoxin free
Sigma-Aldrich
Hydrochloric acid solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Sodium hydroxide solution, 1.0 N, BioReagent, suitable for cell culture
Supelco
Hydrogen chloride – methanol solution, ~1.25 m HCl (T), for GC derivatization, LiChropur
Supelco
Hydrogen chloride – ethanol solution, ~1.25 M HCl, for GC derivatization, LiChropur
Supelco
Hydrogen chloride – 2-propanol solution, ~1.25 M HCl (T), for GC derivatization, LiChropur
Sigma-Aldrich
Sodium hydroxide solution, BioUltra, for molecular biology, 10 M in H2O