Skip to Content
Merck
CN
  • Development of an immunoaffinity solid phase microextraction method for the identification of penicillin binding protein 2a.

Development of an immunoaffinity solid phase microextraction method for the identification of penicillin binding protein 2a.

Journal of chromatography. A (2014-09-04)
Yuhong Liu, Heather Lord, Małgorzata Maciążek-Jurczyk, Sukhsagar Jolly, Mohamed Asim Hussain, Janusz Pawliszyn
ABSTRACT

Methicillin resistant Staphylococcus aureus (MRSA) is a bacterium that is resistant to many antibiotics. Resistance to methicillin is related to production of penicillin binding protein 2a (PBP2a). The currently presented research involves the development of antibody-linked immunoaffinity solid phase microextraction (SPME) sorbents characterized from several aspects that can identify protein PBP2a. The on-sorbent binding constant Kd of monoclonal anti-PBP2a antibody for its antigen protein PBP2a was determined to be 4×10(-10) M. This value was obtained on the basis of the binding curve determined by selective extraction of its antigen PBP2a at different concentrations. The concentration of PBP2a captured by immunoaffinity sorbents was as low as 10ng/mL; lower concentrations could not be tested due to the sensitivity limitation of the LC-MS/MS system available. Surface density was estimated at 59 ng antibody/cm(2). To reduce non-specific binding, especially when the antigen is a protein, bovine serum albumin (BSA) was used to pretreat surfaces. The established immunoaffinity platform technology is expected to provide insights into the development of a practical, specific, sensitive and accurate assay for in vitro and in vivo diagnostics of MRSA.

MATERIALS
Product Number
Brand
Product Description

Supelco
Sodium hydroxide concentrate, 0.1 M NaOH in water (0.1N), Eluent concentrate for IC
Supelco
Dehydrated Alcohol, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Ethanolamine, ACS reagent, ≥99.0%
Sigma-Aldrich
Glutaric dialdehyde solution, 50 wt. % in H2O, FCC
Sigma-Aldrich
Sodium cyanoborohydride solution, 5.0 M in 1 M NaOH
Sigma-Aldrich
Sodium cyanoborohydride, reagent grade, 95%
Sigma-Aldrich
Sodium phosphate dibasic solution, BioUltra, 0.5 M in H2O
Supelco
Ethanol solution, certified reference material, 2000 μg/mL in methanol
Sigma-Aldrich
Ethanolamine, purified by redistillation, ≥99.5%
Sigma-Aldrich
Glutaraldehyde solution, 50 wt. % in H2O
Supelco
Phosphate Standard for IC, TraceCERT®, 1000 mg/L phosphate in water (nominal concentration)
Sigma-Aldrich
DL-Dithiothreitol, ≥99.0% (RT)
Supelco
Methanol, analytical standard
Supelco
Aucubin, analytical standard
Sigma-Aldrich
Glutaraldehyde solution, technical, ~50% in H2O (5.6 M)
Sigma-Aldrich
Sodium hydroxide solution, BioUltra, Molecular Biology, 10 M in H2O
Sigma-Aldrich
DL-Dithiothreitol, BioUltra, Molecular Biology, ≥99.5% (RT)
Supelco
Ethanolamine, analytical standard
Sigma-Aldrich
Sodium hydroxide, BioUltra, suitable for luminescence, ≥98.0% (T), pellets
Sigma-Aldrich
Ethanolamine, puriss. p.a., ACS reagent, ≥99.0% (GC/NT)
Sigma-Aldrich
Sodium cyanoborohydride solution, 1.0 M in THF
Sigma-Aldrich
3-Ethyl-2,4-pentanedione, mixture of tautomers, 98%
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Sigma-Aldrich
Ethanolamine, ≥98%
Sigma-Aldrich
Ethanol Fixative 80% v/v, suitable for fixing solution (blood films)
Sigma-Aldrich
Ethanolamine, liquid, BioReagent, suitable for cell culture, ≥98%
Supelco
Ethanol standards 10% (v/v), 10 % (v/v) in H2O, analytical standard
Sigma-Aldrich
Glutaraldehyde solution, 50% in H2O, suitable for photographic applications
Sigma-Aldrich
Glutaraldehyde solution, Grade I, 25% in H2O, specially purified for use as an electron microscopy fixative
Sigma-Aldrich
Sodium azide, BioXtra