Skip to Content
Merck
CN
  • On-line coupling of solid-phase extraction to gas chromatography-mass spectrometry to determine musk fragrances in wastewater.

On-line coupling of solid-phase extraction to gas chromatography-mass spectrometry to determine musk fragrances in wastewater.

Journal of chromatography. A (2014-09-23)
Laura Vallecillos, Francesc Borrull, Eva Pocurull
ABSTRACT

An on-line coupling solid-phase extraction (SPE) has been developed for the first time to preconcentrate trace amounts of 17 musk fragrances extensively used in personal care products (6 polycyclic musks, 3 nitro musks, 7 macrocyclic musks and 1 polycyclic musk degradation product) from wastewater samples, prior to analysis by gas chromatography and mass spectrometry through an on-column interface. A 10 mm × 2 mm I.D. precolumn packed with Oasis HLB (60 μm) or C18 (60 μm) was compared for the optimization of the solid-phase extraction process. The parameters affecting the transfer of the analytes from the precolumn to the GC system (e.g. flow-rate, temperature and solvent vapor exit time) as well as SPE parameters (e.g. sample flow, sample volume, elution solvent, etc.) were optimized. An organic modifier such as methanol was added to the sample before the extraction process to avoid adsorption problems. The use of the MS detector under selected ion monitoring acquisition enabled the analytes to be quantified at low ng L(-1) levels, preconcentrating only 10 mL of sample, and the limits of detection were between 1 and 30 ng L(-1). The method was applied for the determination of musk fragrances in wastewater samples from three urban wastewater treatment plants (WWTPs). The analysis of influent urban wastewater revealed that galaxolide, tonalide and ambrettolide were the most abundant musk compounds with concentrations ranging between 18 ng L(-1) and 45,091 ng L(-1), 852 ng L(-1) and 49,904 ng L(-1) and 507 ng L(-1) and 21,528 ng L(-1) respectively. The remaining musks were present at lower concentrations and two of the macrocyclic musk studied (musk MC4 and civetone) were not detected. The analysis of effluent wastewater showed a decrease in the concentrations of all of the compounds present in influent samples, with the decrease being more significantly in the case of polycyclic and nitro musks than for macrocyclic musks. Only HHCB-lactone remained constant or increased its concentration.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Acetone, natural, ≥97%
Sigma-Aldrich
Acetone, ≥99%, FCC, FG
Supelco
Acetone, analytical standard
Supelco
Cyclohexane, analytical standard
Sigma-Aldrich
Cyclohexane, anhydrous, 99.5%
Sigma-Aldrich
Acetone, ACS reagent, ≥99.5%
Supelco
Residual Solvent - Acetonitrile(solution in DMSO), Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Isopropyl alcohol, ≥99.7%, FCC, FG
Sigma-Aldrich
Cyclohexane, ACS reagent, ≥99%
Sigma-Aldrich
Cyclohexane, ACS reagent, ≥99%
Supelco
Acetone, Pharmaceutical Secondary Standard; Certified Reference Material
Supelco
Acetonitrile(Neat), Pharmaceutical Secondary Standard; Certified Reference Material
USP
Acetone, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Acetone, ACS reagent, ≥99.5%
Sigma-Aldrich
Acetone, puriss., meets analytical specification of Ph. Eur., BP, NF, ≥99% (GC)
Sigma-Aldrich
Acetone, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.5% (GC)
Sigma-Aldrich
Cyclohexane, puriss. p.a., ACS reagent, ≥99.5% (GC)
Sigma-Aldrich
Cyclohexane, Laboratory Reagent, ≥99.8%
Sigma-Aldrich
Acetone, histological grade, ≥99.5%
Sigma-Aldrich
Acetone, Laboratory Reagent, ≥99.5%
Sigma-Aldrich
Cyclohexane, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Acetone, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Acetone, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%
Sigma-Aldrich
Acetone, suitable for HPLC, ≥99.8%
Sigma-Aldrich
Cyclohexane, suitable for HPLC, ≥99.7%
Sigma-Aldrich
2-Propanol, Laboratory Reagent, ≥99.5%
Sigma-Aldrich
Acetonitrile, Preparateur, ≥99.9% (GC), One-time steel-plastic (SP) drum
Supelco
o-Xylene, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Ethyl acetate, natural, ≥99%, FCC, FG
Sigma-Aldrich
Ethyl acetate, ≥99%, FCC, FG