产品名称
Millipore Express SHC 筒式过滤器 20 in. 0.5/0.2 µm 7 号 硅树脂, Chemistry: 0.5 / 0.2 µm Hydrophilic Polyethersulfone (PES) Configuration: 20 in. Code 7
Quality Segment
material
polyethersulfone membrane, polypropylene housing, polypropylene support, silicone O-ring
reg. compliance
meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility
non-sterile
sterilization compatibility
autoclavable compatible
steam-in-place compatible
product line
Millipore Express®
feature
hydrophilic
manufacturer/tradename
Millipore Express®
parameter
0.34 bar max. differential pressure (5 psi) at 135 °C (Forward), 1 bar max. differential pressure (15 psi) at 135 °C (Forward), 1.7 bar max. differential pressure (25 psi) at 80 °C (Forward), 2.1 bar max. differential pressure (30 psi) at 25 °C (Reverse), 6.9 bar max. differential pressure (100 psi) at 25 °C (Forward), 69 mbar max. differential pressure (1 psi) at 135 °C (Reverse)
technique(s)
sterile filtration: suitable
L
20 in. (50.8 cm)
W
2.7 in.
cartridge nominal length
20 in. (50 cm)
diam.
13.8 cm (5.4 in.)
filtration area
0.98 m2
impurities
<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
matrix
Millipore Express® SHC
pore size
0.5/0.2 μm pore size
bubble point
≥4000 mbar (58 psig), air with water at 23 °C
cartridge code
Code 7
General description
Millipore Express® SHC filters provide you with a single solution for a range of process fluids, minimizing validation efforts and simplifying filter inventory and stocking requirements. With Millipore Express® SHC filters, you increase productivity, shorten cycle-time and reduce cost.
Application
- Media additives
- Column protection
- Concentrated protein streams
- Cell harvest (post clarification)
- Caustics/pH adjusters
- Buffers
- CIP solution
Features and Benefits
- High capacity, high flux hydrophilic PES membranes
- Validated sterilizing-grade performance
- Easy wetting and integrity testing
- Superior throughput in high fouling streams, including media and protein containing solutions
- Increased capacity for improved process efficiency and economy
- Broad chemical compatibility across a wide pH range (1-14) — caustic compatible
Packaging
Preparation Note
25 forward or 22 forward and 3 reverse SIP cycles of 30 min @ 135 °C and 0.35 bar (5) or 3 forward SIP cycles of 30 min @ 135 °C and 1 bar (15 psid); 25 autoclave cycles of 60 min @ 126 °C
Analysis Note
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
After sterilization and a controlled water flush of 40 L, samples exhibited less than 500 ppb TOC per USP <64> and less than 1.3 µS/cm per USP <64> at 25 °C.
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer wetting instructions of Filters with MILLIPORE EXPRESS® Membrane user guide
- Storage Statement: Please refer Filters with MILLIPORE EXPRESS® Membrane user guide
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
Still not finding the right product?
Explore all of our products under Millipore Express SHC 筒式过滤器 20 in. 0.5/0.2 µm 7 号 硅树脂
使用 Emprove® 计划保持符合 GMP 要求
使用Emprove® Dossiers可加快资格认证、保持合规性并节省时间。
注意：您将进入 EmproveSuite.com。您的用户名和密码与 SigmaAldrich.com 是分开的，可能不同。
免费注册，几分钟内即可访问 Emprove® Dossiers。 升级您的订阅计划，解锁 Emprove® Suite 中的高级定制内容。
没有找到您要找的内容？访问 Emprove® 计划帮助页面。