Mobius® Power MIX 100
Liquid-Liquid Mixing Characterization Map
100
75
50
25
Liters
0
10
20
30
40
50
60
0 100 200 300 400
M
ix
in
g
Ti
m
e,
s
ec
on
ds
Impeller
Number: 11024-24-1
Specific Rotation: -47 TO -49º (10 g/100 ml 75%
Acetic Acid at 25 °C)1
The aggregation number for digitonin is 60.
Commercial digitonin is a mixture consisting of about
five glycosides
light blue
trace), and on a 100x4.6 mm id Shiseido PC-HILIC with 5 micron particles also having 100
Angstrom pore size (red trace) using 75:25 (v/v) acetonitrile and ammonium acetate buffer
(40 mM, pH 6.7
binding capacity of ≥ 12 mg/ml show higher
than 75% removal in case of both anti-A and anti-B
IgG. This is shown in figures 7 and 8 below.
0
20
40
60
80
30
20
50
60
Fi
lt
ra
ti
on
t
im
e
(s
ec
.)
Pepto
Bismol®
Calamine
lotion
Milk of
magnesia
Cold and flu
syrup remedy
Concentration 1% 75% 75% 100%
Viscosity
Carbon disulfide; 75-15-0] 및 이를 0.1% 이상 함유한 혼합물질
급성 흡입독성,
인화성 액체
2019-5 산화에틸렌[Ethylene oxide; 75-21-8] 및 이를 0.1% 이상 함유한 혼합물질
급성 흡입독성,
인화성 가스
2019-6 메틸디클로로실란[Methyldichlorosilane ; 75-54-7] 및 이를 10%
cells from a 25 cm2 flask to a 75 cm2 flask.
1. Prepare a 75 cm2 flask with 0.1% Gelatin Solution.
2. Examine the ES cells under the microscope. The cells should be 60% confluent.
and mouse importin (60 kDa). The antibody can
be used in ELISA, immunoblotting, immunoprecipitation,
and immunocytochemistry. The antibody recognizes
mouse importin 1, 3, 5, and 7.
The importin
three different
conditions: cold (2 – 4 °C), room temperature
(25 °C, 60 % relative humidity (rH)), and
accelerated (40 °C, 75 % rH). At each time
point, the extrudates were measured using
DSC (to
three different
conditions: cold (2 – 4 °C), room temperature
(25 °C, 60 % relative humidity (rH)), and
accelerated (40 °C, 75 % rH). At each time
point, the extrudates were measured using
DSC (to
Blue Albumin and IgG Depletion Medium is
supplied as a slurry in 25% (v/v) ethanol with 75 mM
NaCl containing 60% packed medium. The medium in
the bottle must be completely resuspended prior to
removing
10 min at 70°C.
2. 5-50 μL applied to Minigel lane (0.75-1.5 mm width) and run at standard conditions. (60 mA for 2 1.5 mm Minigel
gels, 1.4 h). It is suggested that you run 5-15% acrylamide (37.5:1
as directed for Procedure in the Assay.
Not less than 75% (Q) of the labeled amounts of C8H9NO2, C9H8O4, and C8H10N4O2 is dissolved in 60 min.
17
Acetaminophen, Aspirin and Caffeine (USP)