Skip to Content
Merck
CN
  • Modelled target attainment after meropenem infusion in patients with severe nosocomial pneumonia: the PROMESSE study.

Modelled target attainment after meropenem infusion in patients with severe nosocomial pneumonia: the PROMESSE study.

The Journal of antimicrobial chemotherapy (2014-09-14)
Frédéric Frippiat, Flora Tshinanu Musuamba, Laurence Seidel, Adelin Albert, Raphaël Denooz, Corinne Charlier, Françoise Van Bambeke, Pierre Wallemacq, Julie Descy, Bernard Lambermont, Nathalie Layios, Pierre Damas, Michel Moutschen
ABSTRACT

The objective of this study was to propose an optimal treatment regimen of meropenem in critically ill patients with severe nosocomial pneumonia. Among 55 patients in intensive care treated with 1 g of meropenem every 8 h for severe nosocomial pneumonia, 30 were assigned to intermittent infusion (II; over 0.5 h) and 25 to extended infusion (EI; over 3 h) groups. Based on plasma and epithelial lining fluid (ELF) concentrations determined at steady-state, pharmacokinetic modelling and Monte Carlo simulations were undertaken to assess the probability of attaining drug concentrations above the MIC for 40%-100% of the time between doses (%T > 1-fold and 4-fold MIC), for 1 or 2 g administered by either method. Penetration ratio, measured by the ELF/plasma ratio of AUCs, was statistically higher in the EI group than in the II group (mean ± SEM: 0.29 ± 0.030 versus 0.20 ± 0.033, P = 0.047). Considering a maximum susceptibility breakpoint of 2 mg/L, all dosages and modes of infusions achieved 40%-100% T > 1-fold MIC in plasma, but none did so in ELF, and only the 2 g dose over EI achieved 40%-100% T > 4-fold MIC in plasma. The optimum regimen to treat severe nosocomial pneumonia was 2 g of meropenem infused over 3 h every 8 h. This regimen achieved the highest pharmacodynamic targets both in plasma and in ELF.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Urea-12C, 99.9 atom % 12C
Sigma-Aldrich
Urea solution, BioUltra, ~8 M in H2O
Sigma-Aldrich
Urea solution, 40 % (w/v) in H2O
Millipore
Urea solution, suitable for microbiology, 40% in H2O
USP
Meropenem, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
Urea, BioXtra, pH 7.5-9.5 (20 °C, 5 M in H2O)
Sigma-Aldrich
Urea, meets USP testing specifications
Sigma-Aldrich
Urea, powder, BioReagent, Molecular Biology, suitable for cell culture
Sigma-Aldrich
Urea, ReagentPlus®, ≥99.5%, pellets
Sigma-Aldrich
Urea, ACS reagent, 99.0-100.5%
Sigma-Aldrich
Urea, suitable for electrophoresis
Sigma-Aldrich
Urea, puriss., meets analytical specification of Ph. Eur., BP, USP, 99.0-100.5%, 99.0-101.0% (calc. on dry substance)
Sigma-Aldrich
Urea, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99%
Sigma-Aldrich
Urea, BioUltra, Molecular Biology, 99% (T)
Sigma-Aldrich
2,3-Dimercapto-1-propanol, ≥98% (iodometric)
Supelco
Urea, 8 M (after reconstitution with 16 mL high purity water)
USP
Urea, United States Pharmacopeia (USP) Reference Standard
Supelco
Urea, analytical standard
Sigma-Aldrich
Urea, Vetec, reagent grade, 99%
Urea, European Pharmacopoeia (EP) Reference Standard