Quantification of five plasticizers used in PVC tubing through high performance liquid chromatographic-UV detection.

Searching for alternatives to di-(2-ethylhexyl)-phthalate, a plasticizer that has been widely used in the manufacturing of PVC medical devices, has become a major challenge since a European regulation underlined some clinical risks. The aim of this study is to develop an HPLC-UV method to quantify the currently used alternative plasticizers to DEHP. Five plasticizers, acetyl tributyl citrate, di-(2-ethylhexyl)-phthalate, di-(ethylhexyl)-terephthalate, di-isononyl-1,2-cyclohexane-dicarboxylate, and trioctyl trimellitate, were separated on a C8 stationary phase (2.6 μm, 100 mm × 4.6mm) under gradient elution in 13 min. They were detected at 221 nm leading to a quantification threshold from 0.3 to 750 μg/mL as a function of the plasticizer. Within-day and between-day precisions were inferior to 0.9% and 18%, respectively. The assays were validated according to the accuracy profile method. Plasticizers were extracted from PVC-tubing by dissolving PVC in THF then precipitating it in methanol with a yield of over 90% for each plasticizer. This assay could feasibly be used to quantify plasticizers in PVC medical devices.