Skip to Content
Merck
CN
  • Sequential solvent induced phase transition extraction for profiling of endogenous phytohormones in plants by liquid chromatography-mass spectrometry.

Sequential solvent induced phase transition extraction for profiling of endogenous phytohormones in plants by liquid chromatography-mass spectrometry.

Journal of chromatography. B, Analytical technologies in the biomedical and life sciences (2015-10-07)
Bao-Dong Cai, Er-Cui Ye, Bi-Feng Yuan, Yu-Qi Feng
ABSTRACT

In the current study, a novel method for high-throughput and sensitive determination of 12 phytohormones in plants was developed by using sequential solvent induced phase transition extraction (SIPTE) coupled with ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). In sequential SIPTE, 0.1% formic acid (v/v) and 50mM NaHCO3 aqueous solution were used for enrichment and purification of alkaline and acidic phytohormones from the acetonitrile extract of plant tissues in sequence, in which hydrophobic solvent (toluene) was added to the acetonitrile aqueous mixture for driving the phase separation. Under optimized sequential SIPTE conditions, the phytohormones in acetonitrile extract of plant tissues could be effectively enriched and purified, which was in favor of the following UPLC-MS/MS analysis with less matrix effect. The phytohormones could be detected using the developed sequential SIPTE-UPLC-MS/MS method with the limits of the detection (LODs) ranging from 0.56 to 438.60pgmL(-1) and linear range over 2 orders of magnitude with correlation coefficients (r)>0.9970. The relative recoveries of the detected phytohormones were in the range of 85.1-114.6%. Finally, the proposed method was applied to simultaneous determination of endogenous phytohormones in different tissues of model plants (Oryza sativa and Arabidopsis thaliana) with small amount of sample size (5mg, fresh weight). The proposed method may be suitable for studying the distribution of phytohormones in model plants.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Butyl acetate, ≥99%, FCC, FG
Sigma-Aldrich
Chloroform, anhydrous, ≥99%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
1-Octanol, natural, ≥98%, FCC
Sigma-Aldrich
1-Octanol, anhydrous, ≥99%
Sigma-Aldrich
Butyl acetate, anhydrous, ≥99%
Sigma-Aldrich
Butyl acetate, natural, ≥98%, FG
Sigma-Aldrich
Sodium bicarbonate, powder, BioReagent, Molecular Biology, suitable for cell culture, suitable for insect cell culture
Sigma-Aldrich
Sodium bicarbonate, BioXtra, 99.5-100.5%
Sigma-Aldrich
1-Octanol, ≥98%, FCC, FG
Sigma-Aldrich
Chloroform, anhydrous, contains amylenes as stabilizer, ≥99%
Sigma-Aldrich
Chloroform, ≥99%, PCR Reagent, contains amylenes as stabilizer
Sigma-Aldrich
Cyclohexane, anhydrous, 99.5%
Sigma-Aldrich
Sodium bicarbonate, puriss., meets analytical specification of Ph. Eur., BP, USP, FCC, E500, 99.0-100.5%, powder
Sigma-Aldrich
Chloroform, contains amylenes as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Cyclohexane, ACS reagent, ≥99%
Sigma-Aldrich
Sodium bicarbonate, ReagentPlus®, ≥99.5%, powder
Sigma-Aldrich
Sodium bicarbonate, ACS reagent, ≥99.7%
Sigma-Aldrich
Cyclohexane, ACS reagent, ≥99%
Sigma-Aldrich
1-Octanol, ReagentPlus®, 99%
Sigma-Aldrich
Sodium bicarbonate, anhydrous, free-flowing, Redi-Dri, ACS reagent, ≥99.7%
Sigma-Aldrich
Cyclohexane, Laboratory Reagent, ≥99.8%
Sigma-Aldrich
Chloroform, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
Sodium bicarbonate, anhydrous, free-flowing, Redi-Dri, ReagentPlus®, ≥99.5%
Sigma-Aldrich
Sodium bicarbonate, Vetec, reagent grade, 99%
Sigma-Aldrich
Chloroform, contains ethanol as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Cyclohexane, puriss. p.a., ACS reagent, ≥99.5% (GC)
Sigma-Aldrich
1-Octanol, ACS reagent, ≥99%
Sigma-Aldrich
Chloroform, ACS spectrophotometric grade, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Butyl acetate, ACS reagent, ≥99.5%
Sigma-Aldrich
Butyl acetate, ReagentPlus®, 99.5%