Skip to Content
Merck
CN
  • 3D imaging of cell interactions with electrospun PLGA nanofiber membranes for bone regeneration.

3D imaging of cell interactions with electrospun PLGA nanofiber membranes for bone regeneration.

Acta biomaterialia (2015-09-09)
Urszula Stachewicz, Tuya Qiao, Simon C F Rawlinson, Filipe Veiga Almeida, Wei-Qi Li, Michael Cattell, Asa H Barber
ABSTRACT

The interaction between resident cells and electrospun nanofibers is critical in determining resultant osteoblast proliferation and activity in orthopedic tissue scaffolds. The use of techniques to evaluate cell-nanofiber interactions is critical in understanding scaffold function, with visualization promising unparalleled access to spatial information on such interactions. 3D tomography exploiting focused ion beam (FIB)-scanning electron microscopy (SEM) was used to examine electrospun nanofiber scaffolds to understand the features responsible for (osteoblast-like MC3T3-E1 and UMR106) cell behavior and resultant scaffold function. 3D imaging of cell-nanofiber interactions within a range of electrospun poly(d,l-lactide-co-glycolide acid) (PLGA) nanofiber scaffold architectures indicated a coherent interface between osteoblasts and nanofiber surfaces, promoting osteoblast filopodia formation for successful cell growth. Coherent cell-nanofiber interfaces were demonstrated throughout a randomly organized and aligned nanofiber network. Gene expression of UMR106 cells grown on PLGA fibers did not deviate significantly from those grown on plastic, suggesting maintenance of phenotype. However, considerably lower expression of Ibsp and Alpl on PLGA fibers might indicate that these cells are still in the proliferative phase compared with a more differentiated cell on plastic. This work demonstrates the synergy between designing electrospun tissue scaffolds and providing comprehensive evaluation through high resolution imaging of resultant 3-dimensional cell growth within the scaffold. Membranes made from electrospun nanofibers are potentially excellent for promoting bone growth for next-generation tissue scaffolds. The effectiveness of an electrospun membrane is shown here using high resolution 3D imaging to visualize the interaction between cells and the nanofibers within the membrane. Nanofibers that are aligned in one direction control cell growth at the surface of the membrane whereas random nanofibers cause cell growth into the membrane. Such observations are important and indicate that lateral cell growth at the membrane surface using aligned nanofibers could be used for rapid tissue repair whereas slower but more extensive tissue production is promoted by membranes containing random nanofibers.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Carbon, mesoporous, hydrophilic pore surface
Sigma-Aldrich
Carbon, mesoporous
Sigma-Aldrich
Carbon, mesoporous, nanopowder, less than 500 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
N,N-Dimethylformamide, anhydrous, 99.8%
Sigma-Aldrich
Carbon, mesoporous, less than 100 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
Carbon, mesoporous, nanopowder, graphitized, less than 250 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
Activated Charcoal Norit®, Norit® SX2, powder, from peat, multi-purpose activated charcoal, steam activated and acid washed
Sigma-Aldrich
Chloroform, anhydrous, ≥99%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Chloroform, anhydrous, contains amylenes as stabilizer, ≥99%
Sigma-Aldrich
Os EnCat® 40, extent of labeling: 0.3 mmol/g Os loading
Sigma-Aldrich
Osmium tetroxide, ReagentPlus®, 99.8%
Sigma-Aldrich
Chloroform, contains amylenes as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
N,N-Dimethylformamide, puriss. p.a., ACS reagent, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
Activated Charcoal Norit®, Norit® RB3, steam activated, rod
Sigma-Aldrich
Activated Charcoal Norit®, Norit® GAC 1240W, from coal, steam activated, granular
Sigma-Aldrich
N,N-Dimethylformamide, ReagentPlus®, ≥99%
Sigma-Aldrich
Activated Charcoal Norit®, Norit® SX ultra, from peat, steam activated and acid washed, highly purified, powder
Sigma-Aldrich
N,N-Dimethylformamide, biotech. grade, ≥99.9%
Sigma-Aldrich
N,N-Dimethylformamide, ACS reagent, ≥99.8%
Sigma-Aldrich
N,N-Dimethylformamide, Molecular Biology, ≥99%
Sigma-Aldrich
Chloroform, contains ethanol as stabilizer, ACS reagent, ≥99.8%
Sigma-Aldrich
Chloroform, ACS spectrophotometric grade, ≥99.8%, contains 0.5-1.0% ethanol as stabilizer
Sigma-Aldrich
Chloroform, ≥99%, PCR Reagent, contains amylenes as stabilizer
Sigma-Aldrich
Chloroform, contains 100-200 ppm amylenes as stabilizer, ≥99.5%
Sigma-Aldrich
Activated Charcoal Norit®, Norit® PK 1-3, from peat, steam activated, granular
Sigma-Aldrich
Glycolide, ≥99%
Sigma-Aldrich
L-Glutamine
Sigma-Aldrich
Carbon nanofibers, graphitized, platelets(conical), >98% carbon basis, D × L 100 nm × 20-200 μm
Sigma-Aldrich
3,6-Dimethyl-1,4-dioxane-2,5-dione, 99%
Sigma-Aldrich
Methane-12C, 13C-depleted, 99.9 atom % 12C