iON^™ 尼龙/ABS合金3D打印细丝

We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to enabling category of greener alternatives and thus aligns with "Design for energy efficiency". Nylon filaments are flexible with impressive tensile strength. Its tougher and more resistant to chemicasl than ABS and PLA. Click here for more information.

iOn^™ Nylon/ABS Alloy is an engineering grade material that can be used in demanding applications where PLA and ABS fail due to shortcomings in mechancial; thermal; or chemical performance. 
Select iOn^™ Nylon/ABS Alloy when you want to create parts that focus on functionality; not just fit and finish. 
Manufactured in the USA from virgin resins selected specifically for 3D Printing.
We use state-of-the-art resins; colorants; manufacturing technologies to give you the best possible printing experience. 

Product Attributes:

• True Alloy (not a blend); single Tg
• Higher Thermal Resistance vs. ABS
• Superior Impact Strength vs. ABS
• Improved Solvent Resistance vs. ABS
• Low-Gloss Surface
• Excellent Fatigue Resistance
• Lower Friction/Wear
• Paintable Surface
• Excellent Printability   
• Chemical Resistance: iOn Nylon/ABS Alloy has improved chemical resistance vs. ABS.  This creates wider opportunities for prototyping demanding applications in a number of industries.

This product can be used in material extrusion 3D printing technique.

Recommended Print Conditions:

• Suitable for use on practically ANY desktop 3D Printer; including Makerbot Replicator; Makergear; Ultimaker; Prinrbot; Reprap; Mendel; Prusa; Up! Printers; Solidoodle as well as any printer that has a heated bed.
• Extruder: 245 - 260 °C (ideal layer bonding at 250 - 260 °C); or hotter if you have an all-metal hot-end.  However; do not exceed 300 °C to avoid the onset of polymer degradation.  
• Bed Temp: 105 -110 °C
• Bed Prep: Ideally use Polyimide Tape & ABS/Acetone Slurry [together] or any surface you′ve been using with nylon-based filaments. Please note that acetone has difficulty dissolving iON^™ and standard ABS should be used to make the slurry.  
• Drying: iON^™ is an alloy of Nylon and ABS and therefore absorbs more moisture than ABS would normally alone.  If the filament is stored in humid environments for an extended period of time - it will absorb moisture.  While not in use; we recommend storing iON^™ in the Mylar pouch that comes with the filament.  However; if drying is needed (you hear popping noises during printing - generally water boiling off from the resin); then we recommend drying in an oven at 175 °F (F; not C) for 2-4 hours.  

iON^™ is a trademark of 3DXTech^™
Product of 3DXTech^™

3DXTech is a trademark of 3DXTech

iOn is a trademark of 3DXTech