grade
purum
reaction suitability
reagent type: catalyst
core: beryllium
density
3.01 g/mL at 25 °C (lit.)
SMILES string
[Be]=O
InChI
1S/Be.O
InChI key
LTPBRCUWZOMYOC-UHFFFAOYSA-N
signalword
Danger
Hazard Classifications
Acute Tox. 2 Inhalation - Acute Tox. 3 Oral - Carc. 1B Inhalation - Eye Irrit. 2 - Skin Irrit. 2 - Skin Sens. 1 - STOT RE 1 Inhalation - STOT SE 3
target_organs
Lungs, Respiratory system
存储类别
6.1B - Non-combustible acute toxic Cat. 1 and 2 / very toxic hazardous materials
wgk
WGK 3
flash_point_f
Not applicable
flash_point_c
Not applicable
法规信息
新产品
此项目有
Aleksandr B Stefaniak et al.
AIHA journal : a journal for the science of occupational and environmental health and safety, 64(3), 297-305 (2003-06-18)
The continued occurrence of chronic beryllium disease (CBD) suggests the current occupational exposure limit of 2 microg beryllium per cubic meter of air does not adequately protect workers. This study examined the morphology and measured the particle surface area of
Gregory A Day et al.
Experimental lung research, 31(3), 341-360 (2005-06-21)
Beryllium metal and its oxide and alloys are materials of industrial significance with recognized adverse effects on worker health. Currently, the degree of risk associated with exposure to these materials in the workplace is assessed through measurement of beryllium aerosol
Michael Berakis
Occupational health & safety (Waco, Tex.), 78(5), 34-34 (2009-06-02)
At the facility studied, only two air samples out of 110 were above the detection limit, and none was close to the California PEL. Even though we found no beryllium levels close to the PEL, the facility could still easily