300-30-1 | Sigma-Aldrich

中提供了所需的安装接口规格进水 Millipore 超纯水系统产水（TOC1/4” GAZ 外螺纹流速高达 2L/min 水温 5 – 30°C 最大压力 2 Bar 使用寿命 300 l 材料

外螺纹流速高达 2 L/min 水温 5 – 30°C 最大压力 2 Bar 使用寿命 300 L 材料外壳聚丙烯接头聚乙烯吸附剂活性炭 Luer 插头聚乙烯滤网聚丙烯 HT 订购信息

C 细菌 1 cfu/mL TOC 30 ppb 过滤器 0.22 μm自动化 300 L AFS®, AFS® D/E 纯水（2级）自动化 9000 L Milli-Q ® HX 7000 SD Milli-Q® HX 7000 电阻率 > 5 MΩ·cm @ 25 °C，通常为 10-15 细菌 1) TOC 30 ppb

User Guide - Milli-Q® IX - Chinese

20 333 ZIX7015T0C 75 30 351 如果水系统一天处于水箱注水状态20小时货号日产水量（L）日取水量年度能耗 (kWh) ZIX7003T0C 60 10 413 ZIX7005T0C 100 30 434 ZIX7010T0C 200 40 478 ZIX7015T0C 300 60 518 水耗取决于纯水系统的类型和进水质量

User Guide - Milli-Q® IQ - Chinese

最大总有机碳（TOC） 300 ppm 二氧化硅 30 ppm 要求及规格 41 系统规格电气电源将总电源电压转换为28 V。电源在全世界兼容通用。产品目录频率最大功率电压 ZIQ7003T0C 50-60 Hz ±10% 600 VA 100 – 240

Brochure: Milli-Q® IQ 7003/05/10/15 Pure & Ultrapure System - Chinese

进水要求进水可饮用自来水压力 1–6 bar 温度 5-35 °C 电导率 30 ppm 游离氯 300 ppm 二氧化硅 30 ppm 超纯水，1类水规格1（来自Q-POD® 取水臂）

Milliflex Oasis User Guide

：可以使用配件取下支架，该配件为Milliflex Oasis® 过滤杯底座拆卸工具（货号：MMSUPREMV）。图28：使用拆卸工具拆除过滤杯底座——第1部分图29：使用拆卸工具拆除过滤杯底座——第2部分图30：使用拆卸工具拆除过滤杯底座——第3部分说明：如果泵头中残留一些过滤后的液体，可以用一块干燥、无菌的抹布擦除。无论液体量是多少，都不会影响测试结果。

Product Information Sheet - AG5

0.5 mm 0.5-3.0 mm 1. Fixing 300 ml x 3 10 min. x 3 20 min. x 3 2. Rinse with 300 ml x 3

Spare parts QuikScale® Chromatography columns

LG SST 316 29 1 SEAL—SQUARE SECTION—14.5 O/D x 8 I/D x 3 THICK EPDM 1 1 30 1 SEAL 'U' SECTION BED SUPPORT—Ø303.0 EPDM 1 1 1 1 1 1 31 1 SUPPORT RING—TUBE STOP, GSG 300 BLACK PROPYLENE 1 1

Product Information Sheet - AG25

0.5 mm 0.5-3.0 mm 1. Fixing 300 ml x 3 10 min. x 3 20 min. x 3 2. Rinse with 300 ml x 3

Product Flyer: Chromolith® WP 300 RP-18 2 mm I.D. Monolithic Silica HPLC Columns - Rapid and Robust Protein Chromatography

Column Chromolith® WP 300 RP-18 100-2 mm (1.52370.0001) Mobile Phase A: acetonitrile 0.08% (v/v) TFA B: water 0.1% (v/v) TFA Gradient: Time %A %B 0 5 95 25.0 30 70 30.0 30 70

Supelco SLB -IL60 Ionic Liquid GC Columns

was exposed to 300 °C for a total of 300 minutes. FID Bleed The observed FID bleed levels from the 1st ‘300 °C’ and the 15th ‘300 °C’ run for all columns are displayed in Figure 1. All five

Titrette Digital Bottle-Top Burette Manual

50 200 0.8 0.4 0.1 7037 26 10 - 100 M12-100 200/300 0.8 0.3 0.2 7037 28 20 - 200 M12-200 200/300 0.8 0.3 0.2 7037 30 30 - 300 M12-300 300

Stericup and Steritop Filtration and Storage Systems

400 300 200 100 50 m 40 30 20 100 0 0 0 0 400 100 200 300 50 m 40

Supelco SLB-IL60 Ionic Liquid GC Columns

PEG 4: 7.5 pA @ 260 °C 0 10 20 30 Min 20000 40000 PEG 5: 129 pA @ 300 °C 0 10 20 30 Min 20000 40000 SLB-IL60: 8.3

MultiScreen Filter Plate with Ultracel®-10 Membrane

Daltons (1 mg/mL) BSA 99% 67,000 Daltons (1 mg/mL) Fi ltr at e (µ L) 0 10 20 30 40 50 60 Spin time (min) 300 250 200 150 100

Stericup Steritop User Guide

and Steritop® Systems 1. 500ml 400 300 200 100 50 m 40 30 20 100 0 0 0 0 400

Wavelength (nm) 571652

/Quality 30 >> /JPEG2000ColorImageDict 30 >> /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy

Scalable Process Filtration with Millipore Express® SHR 0.1 μm Filters

Figure 5. run 1 Throughput Profiles Opticap XL 150 Opticap XL 300 Opticap XL 600 47 mm 1 47 mm 2 47 mm 3 47 mm 4 Time (min) 1600

HybridSPE DPX SPE Tips Datasheet Instructions and Troubleshooting

including phosphoric acid. Table 1. HybridSPE®-PL Sample and PPT Agent Guidelines 30 mg 50 mg Plasma/serum 30-100 μL 100-300 μL Precipitating agent 90-300 μL 300-900 μL Featured Products Description

MultiScreen Harvest Plates

17 32.7 30:1 22.3 149:1 MultiScreen Harvest 1H, FB 19 38.5 38:1 20.1 147:1 300 µL MultiScreen Harvest 3H, FC 12 18.2 294:1 19.1 183:1 MultiScreen Harvest 3H, FB 20 17.2 210:1 21.9 211:1 a Mass

Product Information Sheet - Z382469

the solution per well and allow the samples to incubate for 1–2 hours at a temperature range of 18–30°C. 3. Wash the wells three times, 300 µl per well, with PBS or TBS + 0.05% Tween-20. 4. Incubate

ProClin 300 TechNote

ProClin™ 300 preservative in a specific product before its use.10 -3 10-2 10-1 100 101 102 0 15 30 45 *CMIT = Chloromethyl isothiazolin (primary active ingredient in ProClin™ 300 preservative

Product Information Sheet - MAK476

The linear detection range of glucose for the colorimetric assay is 5 – 300 µM (90 µg/dL - 5.4 mg/dL) and 1 – 30 µM for the fluorometric assay. The

Supelco SLB -IL60 Ionic Liquid GC Columns

Table 1. Maximum Temperature Limits * Column Isothermal Programmed PEG 1 280 °C 280 °C PEG 2 260 °C 270 °C PEG 3 250 °C 260 °C PEG 4 250 °C 260 °C PEG 5 280 °C 300 °C SLB-IL60 300 °C 300

Product Information Sheet - M3433

the samples to incubate for 1–2 hours at a temperature within the range of 18–30 °C. Include blank and control wells as appropriate. 3. Wash the wells three times, 300 µl per well, with PBS or TBS

Product Information Sheet - M5557

the samples to incubate for 1–2 hours at a temperature within the range of 18–30 °C. Include blank and control wells as appropriate. 3. Wash the wells three times, 300 µl per well, with PBS or TBS

Product Information Sheet - M4058

the samples to incubate for 1–2 hours at a temperature within the range of 18–30 °C. Include blank and control wells as appropriate. 3. Wash the wells three times, 300 µl per well, with PBS or TBS

Supelco SLB -IL60 Ionic Liquid GC Columns

peak 35) Column Isothermal Programmed PEG 1 280 °C 280 °C PEG 2 260 °C 270 °C PEG 3 250 °C 260 °C PEG 4 250 °C 260 °C PEG 5 280 °C 300 °C SLB-IL60 300 °C 300 °C Description Cat. No. SLB-IL60, 15

Product Information Sheet - EPI015

Sirtuin 1 Concentration 300 µL of (4 ng/mL)Stock Standard Solution 300 µL 2 ng/mL 300 µL of 2 ng/mL 300 µL 1 ng/mL 300 µL of 1 ng/mL 300 µL 0.5 ng/mL 300 µL of 0.5 ng/mL 300