搜索范围
759406
应用筛选条件
关键词:'759406'
显示 1-30 #N/A 47 条结果 关于 "759406" 范围 论文
Mateus Rodrigues Tonetto et al.
The journal of contemporary dental practice, 14(1), 76-79 (2013-04-13)
The behavior of polymer-matrix composite is dependent on the degree of conversion. The aim of this study was to evaluate the degree of conversion of two resin cements following storage at 37°C immediately, 24 and 48 hours, and 7 days
Raquel Osorio et al.
Journal of endodontics, 38(9), 1227-1232 (2012-08-16)
Collagen dentin matrix may represent a suitable scaffold to be remineralized in the presence of bioactive materials. The purpose of this study was to determine if experimental resin cements containing bioactive fillers may modulate matrix metalloproteinase-mediated collagen degradation of etched
Jingwei He et al.
Journal of biomaterials science. Polymer edition, 24(5), 565-573 (2013-04-10)
In order to endow dental resin with antibacterial activity, a series of antibacterial quaternary ammonium methacrylate monomers (QAM) with different substituted alkyl chain length (from 10 to 18) were incorporated into commonly used 2,2-bis[4-(2'-hydroxy-3'-methacryloyloxy-propoxy)-phenyl]propane (Bis-GMA)/triethyleneglycol dimethacrylate (TEGDMA) (50 wt/50 wt)
Anette Kocbach Bølling et al.
Toxicology letters, 216(2-3), 130-138 (2012-11-28)
Methacrylate monomers have been identified in aqueous extracts of freshly cured dental fillings. The hypothesis tested presently was that low concentrations of triethyleneglycol dimethacrylate (TEGDMA) and 2-hydroxyethyl methacrylate (HEMA) alone or in combination interfere with the LPS-induced release of cytokines
Caroline R Szczepanski et al.
European polymer journal, 67, 314-325 (2015-05-09)
This work presents an approach to extend the period for phase separation, independent of temperature, in ambient phase-separating photopolymerizations based on the copolymerization of structurally similar mono- and di-vinyl monomers. Copolymer resins composed of triethylene glycol dimethacrylate (TEGDMA) and ethylene
Jelena Juloski et al.
American journal of dentistry, 26(5), 271-277 (2014-02-01)
To evaluate the microleakage of Class II cavities restored with experimental low-shrinking resin composites proposed for bulk filling and to measure their microtensile bond strength (microTBS) to dentin and compare to those of previously marketed low-shrinkage composites. Class II cavities
N Y Cho et al.
Journal of dental research, 92(1), 76-81 (2012-10-27)
This study detected tooth-composite interfacial debonding during composite restoration by means of acoustic emission (AE) analysis and investigated the effects of composite properties and adhesives on AE characteristics. The polymerization shrinkage, peak shrinkage rate, flexural modulus, and shrinkage stress of
Yumiko Hosoya et al.
American journal of dentistry, 26(5), 286-290 (2014-02-01)
To evaluate the effects of a surface pre-reacted glass-ionomer (S-PRG) filled coating material to arrest artificial enamel lesions in primary teeth. Buccal and lingual enamel was demineralized in 0.1 M lactic acid buffer solution (pH 4.75) for 5 days and
M D Weir et al.
Journal of dental research, 91(10), 979-984 (2012-08-31)
Secondary caries remains the main problem limiting the longevity of composite restorations. The objective of this study was to investigate the remineralization of demineralized human enamel in vitro via a nanocomposite containing nanoparticles of amorphous calcium phosphate (NACP). NACP were
M Dewaele et al.
Journal of dental research, 91(12), 1178-1183 (2012-10-09)
Volumetric shrinkage reduction is a constant challenge in the improvement of dental resins. The inclusion of hyperbranched polymers (HBPs) with modified functionalities (hydroxyl, propionate, and methacrylate) instead of conventional dimethacrylate monomers has the potential to reduce shrinkage, but can also
I V Luque-Martinez et al.
Operative dentistry, 38(1), 39-47 (2012-07-10)
To evaluate the effect of bur roughness on bond strength values and conditioner pattern of two-step self-etch adhesives applied on sclerotic dentin. The roots of 48 bovine incisors were removed and the crowns were divided into four groups: the control
Eliseu Aldrighi Munchow et al.
The journal of contemporary dental practice, 13(3), 299-304 (2012-08-25)
The purpose of this study was to investigate the influence of the surface roughness on the surface microhardness of experimental composites with varying filler concentration. Experimental resin composites were formulated by mixing Bis-GMA and TEGDMA in a 50/50% weight ratio
M Özcan et al.
Operative dentistry, 38(1), 63-72 (2012-07-21)
Service life of discolored and abraded resin composite restorations could be prolonged by repair or relayering actions. Composite-composite adhesion can be achieved successfully using some surface conditioning methods, but the most effective adhesion protocol for relayering is not known when
Caroline R Szczepanski et al.
Polymer, 70, 8-18 (2015-07-21)
Polymerization-induced phase separation (PIPS) was studied in ambient photopolymerizations of triethylene glycol dimethacrylate (TEGDMA) modified by poly(methyl methacrylate) (PMMA). The molecular weight of PMMA and the rate of network formation (through incident UV-irradiation) were varied to influence both the promotion
A Kurbad et al.
International journal of computerized dentistry, 16(1), 69-79 (2013-05-07)
A new type of material consisting of a ceramic substructure infiltrated with a composite material--referred to as a hybrid ceramic--is currently being introduced for dental CAD/CAM use. The characteristic brittleness of ceramic is thus replaced by an elasticity resembling that
I Sideridou et al.
Biomaterials, 23(8), 1819-1829 (2002-04-13)
In this work the room-temperature photopolymerization of Bis-GMA, Bis-EMA, urethane dimethacrylate (UDMA) and triethylene glycol dimethacrylate (TEGDMA) induced by camphoroquinone/N,N-dimethylaminoethyl methacrylate, as photo-initiator system, was followed by FT-IR. The results obtained were then fitted by a non-linear least square method
Fabiana Bucholdz Alves et al.
The journal of adhesive dentistry, 15(5), 439-445 (2013-03-28)
To evaluate the bonding of simplified adhesive systems to sound and caries-affected dentin of primary teeth with microtensile (µTBS) and nanoleakage (NL) tests. Occlusal cavities were prepared in 36 sound second primary molars. Half of the specimens were submitted to
Estimation of the surface gloss of dental nano composites as a function of color measuring geometry.
Ferhan Egilmez et al.
American journal of dentistry, 25(4), 220-226 (2012-10-23)
To estimate the surface gloss of various dental nano composites by using the correlation between deltaE* specular component excluded (SCE) - specular component included (SCI) and surface roughness (Ra). Two brands of commercial and two experimental light-cured resin composites were
Rachel Parke-Houben et al.
Journal of materials science. Materials in medicine, 26(2), 107-107 (2015-02-11)
Three-dimensional scaffolds based on inverted colloidal crystals (ICCs) were fabricated from sequentially polymerized interpenetrating polymer network (IPN) hydrogels of poly(ethyleneglycol) and poly(acrylic acid). This high-strength, high-water-content IPN hydrogel may be suitable for use in an artificial cornea application. Development of
Geum-Jun Han et al.
The journal of adhesive dentistry, 14(5), 461-469 (2012-06-23)
To evaluate the effect of applied power on dental ceramic bonding of composite resin using nonthermal atmospheric pressure plasma (APP). A pencil-type APP torch was used to modify the surface chemical composition and hydrophilicity of dental ceramic and to improve
M Bourbia et al.
Journal of dental research, 92(11), 989-994 (2013-09-13)
A major reason for dental resin composite restoration replacement is related to secondary caries promoted by acid production from bacteria including Streptococcus mutans (S. mutans). We hypothesized that S. mutans has esterase activities that degrade dental resin composites and adhesives.
Liang Chen et al.
Biomedical materials (Bristol, England), 7(4), 045014-045014 (2012-06-13)
The purpose of this research was to investigate the influence of the glyoxylic acid (GA) modification of hydroxyapatite (HAP) nanofibers on their dispersion in bisphenol A glycidyl methacrylate (BisGMA)/triethylene glycol dimethacrylate (TEGDMA) dental composites and also to investigate the mechanical
Maria-Andreea Lungan et al.
Carbohydrate polymers, 125, 323-333 (2015-04-11)
Porous crosslinked microparticles based on glycidyl methacrylate and xanthan were prepared by suspension polymerization and used for loading theophylline, a bronhodilatator drug, in order to obtain new drug delivery systems. The surface morphologies observed by means of SEM and AFM
A Bacchi et al.
Journal of dental research, 93(12), 1320-1325 (2014-09-25)
This study aims at modifying dual-cure composite cements by adding thio-urethane oligomers to improve mechanical properties, especially fracture toughness, and reduce polymerization stress. Thiol-functionalized oligomers were synthesized by combining 1,3-bis(1-isocyanato-1-methylethyl)benzene with trimethylol-tris-3-mercaptopropionate, at 1:2 isocyanate:thiol. Oligomer was added at 0
Dimitrios Kloukos et al.
American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics, 143(4 Suppl), S104-S112 (2013-04-12)
The objective of this systematic review was to assess the short- and long-term release of components of orthodontic adhesives and polycarbonate brackets in the oral environment. Electronic database searches of published and unpublished literature were performed. The following electronic databases
Saeed Hesaraki et al.
Materials science & engineering. C, Materials for biological applications, 109, 110592-110592 (2020-04-02)
Resin-based pit-and-fissure sealants (flowable resin composites) were formulated using bisphenol-A-glycerolatedimethacrylate (Bis-GMA)-triethylene glycol dimethacrylate-(TEGDMA)-diurethanedimethacrylate (UDMA) mixed monomers and multiple fillers, including synthetic strontium fluoride (SrF2) nanoparticles as a fluoride-releasing and antibacterial agent, yttria-stabilized zirconia (YSZ) nanoparticles as an auxiliary filler, and
Mono-or narrow disperse poly (methacrylate-co-divinylbenzene) microspheres by precipitation polymerization
Li, W. H., & Stover, H. D.
Journal of Polymer Science Part A: Polymer Chemistry, 37(15), 2899-2907 (1999)
Fengwei Liu et al.
Materials science & engineering. C, Materials for biological applications, 53, 150-155 (2015-06-05)
The aim of this study was to investigate the effect of poly bisphenol A glycidyl methacrylate (poly(Bis-GMA)) grafted hydroxyapatite whisker (PGHW) on water sorption, solubility and bioactivity of the dental resin composite. PGHW with different graft ratios was synthesized, by
Tatiany Gabrielle Freire Araújo et al.
The journal of adhesive dentistry, 17(2), 117-123 (2015-04-02)
To evaluate the effect of different concentrations of monomers and solvents/diluents on the microtensile bond strength (μTBS) bond strength of experimental low-viscosity resins (infiltrants) to enamel caries-like lesions (ECLL). Flat enamel blocks obtained from sound human third molars were submitted
E Marsich et al.
Acta biomaterialia, 9(2), 5088-5099 (2012-10-13)
Bisphenol A glycidylmethacrylate (BisGMA)/triethyleneglycol dimethacrylate (TEGDMA) thermosets are biomaterials commonly employed for orthopedic and dental applications; for both these fields, bacterial adhesion to the surface of the implant represents a major issue for the outcome of the surgical procedures. In
1/2