CN
Search Within
electronic inks
应用筛选条件
关键词:'electronic inks'
显示 1-30 共 111 条结果 关于 "electronic inks" 范围 论文
Ethan B Secor et al.
Advanced materials (Deerfield Beach, Fla.), 26(26), 4533-4538 (2014-05-02)
Gravure printing of graphene is demonstrated for the rapid production of conductive patterns on flexible substrates. Development of suitable inks and printing parameters enables the fabrication of patterns with a resolution down to 30 μm. A mild annealing step yields
Heng Zhang et al.
Advanced materials (Deerfield Beach, Fla.), 27(45), 7420-7425 (2015-10-21)
Silicon gravure patterns are engineered to have cells that are wettable and lands that are not wettable by aqueous inks. This strategy allows excess ink on the lands to be removed without using a doctor blade. Using an aqueous silica
Amir Abbas Kazemzadeh Farizhandi et al.
Journal of the mechanical behavior of biomedical materials, 110, 103960-103960 (2020-09-23)
Three-dimensional (3D) printing is an efficient technique for the fabrication of electronic devices. It also enables the use conductive of biomaterials in various applications, such as implants and flexible devices. Designing a new bioink is extremely challenging. For bioelectronics devices
Magnus Hummelgård et al.
PloS one, 6(2), e17209-e17209 (2011-03-11)
Metallic nanoparticle inks are used for printed electronics, but to reach acceptable conductivity the structures need to be sintered, usually using a furnace. Recently, sintering by direct resistive heating has been demonstrated. For a microscopic understanding of this Joule heating
R Jolanki et al.
Contact dermatitis, 30(1), 12-15 (1994-01-01)
A 48-year-old female silk-screen printer had worked in the manufacture of circuit boards for 12 years before she got the first symptoms of dermatitis on her wrists and lower arms. On the 1st patch test session, epoxy resin and the
Shuang-Zhuang Guo et al.
Small (Weinheim an der Bergstrasse, Germany), 9(24), 4118-4122 (2013-07-05)
The solvent-cast direct-write fabrication of microstructures is shown using a thermoplastic polymer solution ink. The method employs the robotically controlled microextrusion of a filament combined with a rapid solvent evaporation. Upon drying, the increased rigidity of the extruded filament enables
Junsheng S Li et al.
Langmuir : the ACS journal of surfaces and colloids, 28(22), 8286-8291 (2012-05-19)
A new and simple method for creating superhydrophilic micropatterns on a superhydrophobic surface is demonstrated. The method is based on printing an "ink", an ethanol solution of a phospholipid, onto a porous superhydrophobic surface and, thus, is compatible with a
Ju-Young Park et al.
Journal of oleo science, 60(12), 627-637 (2011-11-30)
Optimal preparation of inkjet ink should be possible through the elucidation of the relationship between dye/additive interactions and ink performance. In the present study, the interactions between the dyes and surfactant additives were investigated. To investigate the physical properties of
Panagiotis G Karagiannidis et al.
ACS nano, 11(3), 2742-2755 (2017-01-20)
We report the exfoliation of graphite in aqueous solutions under high shear rate [∼ 10
Sanghyeon Lee et al.
ACS applied materials & interfaces, 11(7), 7123-7130 (2019-01-27)
Three-dimensional (3D) printing is a next-generation free-form manufacturing technology for structural electronics. The realization of structural electronic devices necessitates the direct integration of electronic circuits into 3D objects. However, creating highly conductive, high-resolution patterns in 3D remains a major challenge.
Alireza Hassani Najafabadi et al.
Advanced materials (Deerfield Beach, Fla.), 26(33), 5823-5830 (2014-07-22)
Biodegradable nanofibrous polymeric substrates are used to fabricate suturable, elastic, and flexible electronics and sensors. The fibrous microstructure of the substrate makes it permeable to gas and liquid and facilitates the patterning process. As a proof-of-principle, temperature and strain sensors
Takashi Nakamura et al.
Nanomaterials (Basel, Switzerland), 8(8) (2018-08-17)
Copper nitride particles have a low decomposition temperature, they absorb light, and are oxidation-resistant, making them potentially useful for the development of novel wiring inks for printing circuit boards by means of intense pulsed light (IPL) sintering at low-energy. Here
Haodong Liu et al.
Advanced materials (Deerfield Beach, Fla.), 33(8), e2004782-e2004782 (2021-01-16)
The revolutionary and pioneering advancements of flexible electronics provide the boundless potential to become one of the leading trends in the exploitation of wearable devices and electronic skin. Working as substantial intermediates for the collection of external mechanical signals, flexible
Ethan B Secor et al.
The journal of physical chemistry letters, 6(4), 620-626 (2015-08-12)
Carbon and post-carbon nanomaterials present desirable electrical, optical, chemical, and mechanical attributes for printed electronics, offering low-cost, large-area functionality on flexible substrates. In this Perspective, recent developments in carbon nanomaterial inks are highlighted. Monodisperse semiconducting single-walled carbon nanotubes compatible with
Ethan B Secor et al.
Advanced materials (Deerfield Beach, Fla.), 27(42), 6683-6688 (2015-10-01)
Intense pulsed light (IPL) annealing of graphene inks is demonstrated for rapid post-processing of inkjet-printed patterns on various substrates. A conductivity of ≈25,000 S m(-1) is achieved following a single printing pass using a concentrated ink containing 20 mg mL(-1)
Metal-based inkjet inks for printed electronics.
Kamyshny A, et al.
Open Applied Physics Journal, 4(1), 4153-4158 (2011)
W Marchal et al.
Nanotechnology, 28(21), 215202-215202 (2017-05-05)
Integration of electronic circuit components onto flexible materials such as plastic foils, paper and textiles is a key challenge for the development of future smart applications. Therefore, conductive metal features need to be deposited on temperature sensitive substrates in a
Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics
Ethan B. Secor , Bok Y. Ahn , Theodore Z. Gao , Jennifer A. Lewis , and Mark C. Hersam
Advanced Materials, 27, 6683-6688 (2015)
Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics
Ethan B. Secor, Bok Y, Ahn, Theodore Z. Gao, Jennifer A. Lewis, Mark C. Hersam
Advanced Materials, 27, 6683-6688 (2015)
Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics
Ethan B. Secor , Bok Y. Ahn , Theodore Z. Gao , Jennifer A. Lewis , and Mark C. Hersam
Advanced Materials, 27, 6683-6688 (2015)
Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics
Ethan B. Secor , Bok Y. Ahn , Theodore Z. Gao , Jennifer A. Lewis , and Mark C. Hersam
Advanced Materials, 27, 6683-6688 (2015)
Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics
Ethan B. Secor , Bok Y. Ahn , Theodore Z. Gao , Jennifer A. Lewis , and Mark C. Hersam
Advanced Materials, 27, 6683-6688 (2015)
Screen-printable electronic ink of ultrathin boron nitride nanosheets
Joseph AM, et al.
ACS Omega, 1(6), 1220-1228 (2016)
Chi-Yuan Yang et al.
Nature communications, 12(1), 2354-2354 (2021-04-23)
Conducting polymers, such as the p-doped poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), have enabled the development of an array of opto- and bio-electronics devices. However, to make these technologies truly pervasive, stable and easily processable, n-doped conducting polymers are also needed. Despite major
Robust Ag nanoplate ink for flexible electronics packaging
Li R, et al.
Nanoscale, 7(16), 7368-7377 (2015)
Screen-Printing of a Highly Conductive Graphene Ink for Flexible Printed Electronics.
P.He et al.
ACS Applied Materials & Interfaces, 11, 32225?32234-32225?32234 (2019)
In situ monitoring of flash-light sintering of copper nanoparticle ink for printed electronics
Hwang H, et al.
Nanotechnology, 23(48), 485205-485205 (2012)
Mahdiyar Shahbazi et al.
Carbohydrate polymers, 240, 116211-116211 (2020-06-02)
A printable nanocomposite hydrogel was fabricated with intercalation of alginate into clay galleries followed by irradiation crosslinking graft copolymerization acrylic acid to remove inorganic micropollutants from wastewater. In this regard, nanocomposite-based ink was treated by electron beam irradiation (5-60 kGy)
Ink-Jet Printing of Electron Donor/Acceptor Blends: Towards Bulk Heterojunction Solar Cells
Marin, V., Holder, E., Wienk, M. M., Tekin, E., Kozodaev, D., & Schubert, U. S.
Macromolecular Rapid Communications, 26(4), 319-324 (2005)
Non-aqueous synthesis of silver nanoparticles using tin acetate as a reducing agent for the conductive ink formulation in printed electronics
Ravi Shankar, et al.
Journal of Materials Chemistry, 21, 10871-10877 (2011)
1/4