Forceps | Sigma-Aldrich

Patch Test Kit

Prepare Filter for Rinse Solvent Unscrew the two sections of the 25 mm filter holder, and use forceps to center a 25 mm white filter disc on the perforated plastic support in the lower section of the

HybriSlip Instructions

Graphic1 1. With forceps remove the scored polyethylene liner to expose a HybriSlip. 2. Remove the HybriSlip from the unscored liner and

S-Pak Memranes Data Sheet

to easily remove it using your forceps. Utilizing sterile forceps, peel back the film and separate the blue paper from the membrane. Remove the membrane with the forceps. Legal Disclaimer We provide

S-Pak Membrane Data Sheet

MerckMillipore.com/EZ Utilizing sterile forceps, peel back the film and separate the blue paper from the membrane. Remove the membrane with the forceps. Place the membrane and blue paper on

Quick Start Guide Clamped Vacuum Filter Holders

Required ● Filter appropriate for your application; see the product catalogue for options ● Filter forceps (cat. no. XX6200006P) ● For filter holders with a silicone stopper, a vacuum filtering flask or

10X Blocking Buffer (B6429) - Data Sheet10x Casein Blocking Buffer (B6429)

with gentle agitation. Use 1 ml/cm 2 of membrane. C. Washing the Membrane 1. Using forceps, transfer the membrane to a clean container containing 1–1.5 ml Wash Buffer 1/cm 2 of membrane

Data Sheet - A5719

temperature with gentle agitation. Use 1 ml/cm2 of membrane. C. Washing the Membrane 1. Using forceps, transfer the membrane to a clean container containing Wash Buffer 1. Use 1-1.5 ml/cm2 of membrane

CLONING CYLINDERS

or magnesium to each plate. 3. Using sterile, curved forceps, center the cylinder over a colony of cells. Using the flat side of the forceps, press gently but firmly on the cylinder to create a seal

Sterifil® Aseptic System and 47 mm Filter Holder User Guide

base. Use sterile forceps to remove the filter. Transfer filter to appropriate media or examine filtrate as required by your application. Unscrew the funnel from the base. Use forceps to remove the

Product Information Sheet - CPSOC

bottle, or pour used solution back into the substrate bottle. Use clean gloves and forceps; do not use rusted forceps. Analytes can be applied to membranes as a dot blot or by gel transfer. Blotting

Product information sheet - XNAT2

multi-well plate for extractions (200 μL minimal well volume) • Small dissecting scissors • Forceps (small to medium in size) • Buccal swab - Sterile foam tipped applicator (Cat. No. WHAWB100032

Product Information Sheet-XNAT2

multi-well plate for extractions (200 μL minimal well volume) • Small dissecting scissors • Forceps (small to medium in size) • Buccal swab - Sterile foam tipped applicator (Cat. No. WHAWB100032

Product information sheet - XNATP

extractions (200 μL minimal well volume) • Scissors, micro-dissecting, Cat. No. Z265985 • Forceps (small to medium in size) • Buccal swab (Sterile foam tipped applicator, Cat. No. A9601)

Product Information Sheet-XNAT

extractions (200 μL minimal well volume) • Scissors, micro-dissecting, Cat. No. Z265985 • Forceps (small to medium in size) • Buccal swab (Sterile foam tipped applicator, Cat. No. A9601)

Product Information Sheet - UALK

exposure cassette, Product No. E 9260, E 9385, E 9510, E 9635 • Plastic development folders • Forceps Precautions and Disclaimer The CDP-Star Universal Kit is for laboratory use only. Not for drug

Milliseal™ Adhesive Membranes

top center of the disc. With membrane forceps, rub from the edge of the disc inward to lift the edge of the disc. 2. Pull the disc off the sheet with the forceps. 3. Center the disc on the top

ACCUMAX™

magnesium free) Centrifuge tubes (15-50 ml) Culture medium Scalpels Pipettes (1 ml, 10 ml) Forceps Petri dishes (100 mm, non-tissue culture grade) Procedure: 1. Transfer the tissue

Cell Invasion Assay Kit

to adjust to room temperature in a tissue culture hood. 2. Sterilize forceps with 70% ethanol and handle inserts with forceps. 3. Add 300 µl of warm serum free media to the interior of the inserts

90 mm Glass Vacuum Filter Holders

90 mm filter appropriate for your application; see the product catalogue for options ● Filter forceps (cat. no. XX6200006P) ● Vacuum filtering flask with ground glass attachment. Refer to Ordering

Product Information Sheet - XNAT2R

or multiwell plate for extractions (200 µL minimal well volume) • Small dissecting scissors • Forceps (small to medium in size) • Buccal swab - Sterile foam tipped applicator, Catalog Number A9601

Product Information Sheet - XNATR

extractions (200 µl minimal well volume) • Scissors, micro-dissecting, Catalog No. Z265985 • Forceps (small to medium in size) • Buccal swab (Sterile foam tipped applicator, Catalog Number A9601

Product Information Sheet - XNAT

extractions (200 µl minimal well volume) • Scissors, micro-dissecting, Catalog No. Z265985 • Forceps (small to medium in size) • Buccal swab (Sterile foam tipped applicator, Catalog Number A9601

Stainless Steel 47 mm Pressure Filter Holder User Guide

barrel. Use smooth-tip forceps to remove the top cap O-ring and filter sealing O-ring. To remove the filter sealing O-ring, gently pry it out of the base by inserting the forceps into the small rounded

Data Sheet-MHA00BSM2

contents equally onto the absorbent pad. 3. Set up the membrane filtration apparatus. Use sterile forceps to put the membrane filter in the assembly. The grid side is up. 4. Invert the sample / diluted

Data Sheet - Orange Serum Broth (MHA000P20)

contents equally onto the absorbent pad. 3. Set up the membrane filtration apparatus. Use sterile forceps to put the membrane filter in the assembly. The grid side is up. 4. Invert the sample / diluted

Data Sheet - MHA000P2T

contents equally onto the absorbent pad. 3. Set up the membrane filtration apparatus. Use sterile forceps to put the membrane filter in the assembly. The grid side is up. 4. Invert the sample / diluted

Data Sheet - Preservative Resistant Yeast (PRY) Broth (MHA00PRY2)

contents equally onto the absorbent pad. 3. Set up the membrane filtration apparatus. Use sterile forceps to put the membrane filter in the assembly. The grid side is up. 4. Invert the sample / diluted

QCM™ Endothelial Cell Invasion Assay (24 well, fluorometric)

plates to room temperature (25°C) prior to initiating assay. 2. Sterilize forceps with 70% ethanol and handle inserts with forceps. 3. Add 300 μL of prewarmed serum free media to the interior of the inserts

Product information sheet - XNATG

.5 or 2 mL) or multi-well plate for extractions • Small dissecting scissors or scalpel • Forceps (small to medium in size) • Buccal swab (Sterile foam tipped applicator, Cat. No. WHAWB100032

Product Information Sheet-XNATG

.5 or 2 mL) or multi-well plate for extractions • Small dissecting scissors or scalpel • Forceps (small to medium in size) • Buccal swab (Sterile foam tipped applicator, Cat. No. WHAWB100032