Merck
CN
  • Surface characterization and osteoblast response to a functionally graded hydroxyapatite/fluoro-hydroxyapatite/titanium oxide coating on titanium surface by sol-gel method.

Surface characterization and osteoblast response to a functionally graded hydroxyapatite/fluoro-hydroxyapatite/titanium oxide coating on titanium surface by sol-gel method.

Cell proliferation (2014-04-18)
G He, B Guo, H Wang, C Liang, L Ye, Y Lin, X Cai
摘要

To improve efficacy of current titanium and its alloys, in bioactivity and speed of osseointegration, of orthopaedic implants. A novel triple-layered functional graded coating, consisting of a porous hydroxyapatite (HA) outermost layer, fluoro-HA (FHA) intermediate layer and titanium oxide (TiO2 ) innermost layer, was created on a titanium substrate by a multistep sol-gel method. X-ray diffraction analysis showed TiO2 anatase and apatite crystallization in the coating. Morphological analysis performed by scanning electron microscopy showed excellent bonding between coating and substrate, with a thickness of ~2 μm. Scratch testing found favourable adhesion strength of the composite coating. In addition, optical microscope images suggested good biocompatibility. Considering thet in vitro cell response, osteoblasts on the coating exhibited higher cell proliferation and ALP activity compared to pure titanium and HA coating, and demonstrated excellent coating bioactivity. Current results indicated that the novel TiO2 /FHA/HA coating has promising clinical applications in orthopaedic and dental implantation.

材料
货号
品牌
产品描述

Sigma-Aldrich
氧化钛(IV), nanopowder, 21 nm primary particle size (TEM), ≥99.5% trace metals basis
Sigma-Aldrich
氧化钛 (IV),锐钛矿, nanopowder, <25 nm particle size, 99.7% trace metals basis
Sigma-Aldrich
氧化钛(IV), puriss., meets analytical specification of Ph. Eur., BP, USP, 99-100.5%
Sigma-Aldrich
氧化钛 (IV),锐钛矿, powder, 99.8% trace metals basis
Sigma-Aldrich
钛 (IV) 氧化物,金红石型, powder, <5 μm, ≥99.9% trace metals basis
Sigma-Aldrich
氧化钛(IV), ReagentPlus®, ≥99%
Sigma-Aldrich
氧化钛 (IV),锐钛矿, powder, −325 mesh, ≥99% trace metals basis
Sigma-Aldrich
钛 (IV) 氧化物,金红石型, nanopowder, <100 nm particle size, 99.5% trace metals basis
Sigma-Aldrich
氧化钛(IV),金红石和锐钛矿混合物, nanopowder, <100 nm particle size (BET), 99.5% trace metals basis
Sigma-Aldrich
氧化钛(IV),金红石和锐钛矿混合物, nanoparticles, <150 nm particle size (volume distribution, DLS), dispersion, 40 wt. % in H2O, 99.5% trace metals basis
Sigma-Aldrich
钛 (IV) 氧化物,金红石型, 99.995% trace metals basis
Sigma-Aldrich
羟基磷灰石, puriss., meets analytical specification of Ph. Eur., BP, FCC, E341, ≥90% (calculated on glowed substance)
Sigma-Aldrich
羟基磷灰石, purum p.a., ≥90% (as Ca3(PO4)2, KT)
Sigma-Aldrich
钛 (IV) 氧化物,金红石型, ≥99.98% trace metals basis
Sigma-Aldrich
氧化钛(IV), contains 1% Mn as dopant, nanopowder, <100 nm particle size (BET), ≥97%
Sigma-Aldrich
氧化钛(IV), nanowires, diam. × L ~100 nm × 10 μm
Sigma-Aldrich
氧化钛(IV), nanowires, diam. × L ~10 nm × 10 μm
Sigma-Aldrich
钛 (IV) 氧化物,金红石型, <001>, (single crystal substrate), ≥99.9% trace metals basis, L × W × thickness 10 mm × 10 mm × 0.5 mm
钛, mesh, 100x100mm, nominal aperture 0.19mm, wire diameter 0.23mm, 60x60 wires/inch, open area 20%, twill weave
钛, mesh, 100x100mm, nominal aperture 4.3mm, wire diameter 1.5mm, 4.4x4.4 wires/inch, open area 94%, platinized diamond mesh
Sigma-Aldrich
钛, wire, diam. 0.5 mm, 99.99% trace metals basis
钛, sphere, 200pcs, diameter 3mm, 99.6+%
钛, rod, 10mm, diameter 50mm, 99.99+%
钛, wire reel, 100m, diameter 0.5mm, as drawn, 99.6+%
钛, tube, 500mm, outside diameter 2.03mm, inside diameter 1.55mm, wall thickness 0.24mm, annealed, 99.6+%
钛, tube, 200mm, outside diameter 1.6mm, inside diameter 1.2mm, wall thickness 0.2mm, hard, 99.6+%
钛, rod, 100mm, diameter 10mm, annealed, 99.6+%
钛, rod, 25mm, diameter 50mm, 99.99+%
钛, wire reel, 0.5m, diameter 0.5mm, as drawn, 99.99+%
钛, rod, 200mm, diameter 9.5mm, annealed, 99.99+%