跳转至内容
Merck
CN
  • Limited role for biliary stent as surrogate fiducial marker in pancreatic cancer: stent and intratumoral fiducials compared.

Limited role for biliary stent as surrogate fiducial marker in pancreatic cancer: stent and intratumoral fiducials compared.

International journal of radiation oncology, biology, physics (2014-05-08)
Astrid van der Horst, Eelco Lens, Silvia Wognum, Rianne de Jong, Jeanin E van Hooft, Geertjan van Tienhoven, Arjan Bel
摘要

Because of low soft-tissue contrast of cone beam computed tomography (CBCT), fiducial markers are often used for radiation therapy patient setup verification. For pancreatic cancer patients, biliary stents have been suggested as surrogate fiducials. Using intratumoral fiducials as standard for tumor position, this study aims to quantify the suitability of biliary stents for measuring interfractional and respiratory-induced position variations of pancreatic tumors. Eleven pancreatic cancer patients with intratumoral fiducials and a biliary stent were included in this study. Daily CBCT scans (243 in total) were registered with a reference CT scan, based on bony anatomy, on fiducial markers, and on the biliary stent, respectively. We analyzed the differences in tumor position (ie, markers center-of-mass position) among these 3 registrations. In addition, we measured for 9 patients the magnitude of respiratory-induced motion (MM) of the markers and of the stent on 4-dimensional CT (4DCT) and determined the difference between these 2 magnitudes (ΔMM). The stent indicated tumor position better than bony anatomy in 67% of fractions; the absolute difference between the markers and stent registration was >5 mm in 46% of fractions and >10 mm in 20% of fractions. Large PTV margins (superior-inferior direction, >19 mm) would be needed to account for this interfractional position variability. On 4DCT, we found in superior-inferior direction a mean ΔMM of 0.5 mm (range, -2.6 to 4.2 mm). For respiratory-induced motion, the mean ΔMM is small, but for individual patients the absolute difference can be >4 mm. For interfractional position variations, a stent is, on average, a better surrogate fiducial than bony anatomy, but large PTV margins would still be required. Therefore, intratumoral fiducials are recommended for online setup verification for all pancreatic patients scheduled for radiation therapy, including patients with a biliary stent.

材料
Product Number
品牌
产品描述

Sigma-Aldrich
金, powder, <45 μm, 99.99% trace metals basis
Sigma-Aldrich
镀金显微镜载片, layer thickness 1000 Å, 99.999% (Au)
金, rod, 50mm, diameter 3.0mm, as drawn, 99.95%
Sigma-Aldrich
金, wire, diam. 0.25 mm, 99.99% trace metals basis
金, sphere, 20pcs, diameter 0.5mm, 99.99%
金, insulated wire, 1m, conductor diameter 0.025mm, insulation thickness 0.005mm, polyester insulation, 99.99%
金, insulated wire, 2m, conductor diameter 0.05mm, insulation thickness 0.007mm, polyimide insulation, 99.99%
金, insulated wire, 5m, conductor diameter 0.125mm, insulation thickness 0.014mm, polyester insulation, 99.99%
金, insulated wire, 2m, conductor diameter 0.05mm, insulation thickness 0.007mm, polyester insulation, 99.99%
金, insulated wire, 0.1m, conductor diameter 0.125mm, insulation thickness 0.016mm, PTFE (polytetrafluoroethylene) insulation, 99.99%
金, rod, 10mm, diameter 3.0mm, as drawn, 99.95%
金, insulated wire, 2m, conductor diameter 0.125mm, insulation thickness 0.014mm, polyester insulation, 99.99%
金, rod, 25mm, diameter 2.0mm, as drawn, 99.95%
金, insulated wire, 5m, conductor diameter 0.05mm, insulation thickness 0.007mm, polyimide insulation, 99.99%
金, insulated wire, 1m, conductor diameter 0.05mm, insulation thickness 0.007mm, polyimide insulation, 99.99%
金, microleaf disks, 10mm, thinness 0.25μm, specific density 483μg/cm2, removable support, 99.99+%
金, rod, 100mm, diameter 2.0mm, as drawn, 99.95%
金, rod, 10mm, diameter 5.0mm, as drawn, 99.95%
金, rod, 25mm, diameter 3.0mm, as drawn, 99.95%
金, tube, 100mm, outside diameter 2.0mm, inside diameter 1.8mm, wall thickness 0.1mm, as drawn, 99.95%
金, rod, 25mm, diameter 4.0mm, as drawn, 99.95%
金, rod, 50mm, diameter 2.0mm, as drawn, 99.95%
金, insulated wire, 0.5m, conductor diameter 0.125mm, insulation thickness 0.014mm, polyester insulation, 99.99%
金, microfoil, disks, 10mm, thinness 0.1μm, specific density 204.1μg/cm2, permanent mylar 3.5μm support, 99.99+%
金, microfoil, disks, 10mm, thinness 0.5μm, specific density 966μg/cm2, permanent mylar 3.5μm support, 99.99+%
金, rod, 10mm, diameter 6.0mm, as drawn, 99.95%
金, microleaf disks, 10mm, thinness 0.5μm, specific density 966μg/cm2, removable support, 99.99+%
金, rod, 6mm, diameter 6.0mm, as drawn, 99.95%
金, tube, 200mm, outside diameter 1.0mm, inside diameter 0.5mm, wall thickness 0.25mm, as drawn, 99.95%
金, insulated wire, 0.5m, conductor diameter 0.05mm, insulation thickness 0.007mm, polyimide insulation, 99.99%