跳转至内容
Merck
CN
  • Adverse reaction to metal debris is more common in patients following MoM total hip replacement with a 36 mm femoral head than previously thought: results from a modern MoM follow-up programme.

Adverse reaction to metal debris is more common in patients following MoM total hip replacement with a 36 mm femoral head than previously thought: results from a modern MoM follow-up programme.

The bone & joint journal (2014-12-03)
O Lainiala, A Eskelinen, P Elo, T Puolakka, J Korhonen, T Moilanen
摘要

We conducted a retrospective study to assess the prevalence of adverse reactions to metal debris (ARMD) in patients operated on at our institution with metal-on-metal (MoM) total hip replacements with 36 mm heads using a Pinnacle acetabular shell. A total of 326 patients (150 males, 175 hips; 176 females, 203 hips) with a mean age of 62.7 years (28 to 85) and mean follow-up of 7.5 years (0.1 to 10.8) participating in our in-depth modern MoM follow-up programme were included in the study, which involved recording whole blood cobalt and chromium ion measurements, Oxford hip scores (OHS) and plain radiographs of the hip and targeted cross-sectional imaging. Elevated blood metal ion levels (> 5 parts per billion) were seen in 32 (16.1%) of the 199 patients who underwent unilateral replacement. At 23 months after the start of our modern MoM follow-up programme, 29 new cases of ARMD had been revealed. Hence, the nine-year survival of this cohort declined from 96% (95% CI 95 to 98) with the old surveillance routine to 86% (95% CI 82 to 90) following the new protocol. Although ARMD may not be as common in 36 mm MoM THRs as in those with larger heads, these results support the Medicines and Healthcare Products Regulatory Agency guidelines on regular reviews and further investigations, and emphasise the need for specific a follow-up programme for patients with MoM THRs.

材料
产品编号
品牌
产品描述

Sigma-Aldrich
钴, powder, 2 μm particle size, 99.8% trace metals basis
Sigma-Aldrich
铬, powder, ≥99% trace metals basis, <45 μm
Sigma-Aldrich
铬, powder, 99.5%, −100 mesh
Sigma-Aldrich
铬, chips, 99.995% trace metals basis
Sigma-Aldrich
钴, granular, 99.99% trace metals basis
Sigma-Aldrich
钴, Carbon coated magnetic, nanopowder, <50 nm particle size (TEM), ≥99%
Sigma-Aldrich
钴, pieces, 99.5% trace metals basis
Sigma-Aldrich
钴, wire, diam. 1.0 mm, 99.995% trace metals basis
Sigma-Aldrich
铬, chips, thickness ~2 mm, 99.5%
铬, rod, 25mm, diameter 2.0mm, 99.7+%
Sigma-Aldrich
钴, foil, thickness 0.1 mm, 99.95% trace metals basis
Sigma-Aldrich
钴, foil, thickness 1.0 mm, 99.95% trace metals basis
Sigma-Aldrich
钴, foil, thickness 0.1 mm, ≥99.99%
铬, rod, 50mm, diameter 2.0mm, 99.7+%
Sigma-Aldrich
钴, rod, diam. 5.0 mm, 99.95% trace metals basis
钴, foil, light tested, 25x25mm, thickness 0.01mm, 99.9%
铬, rod, 10mm, diameter 2.0mm, 99.7+%
钴, foil, 4mm disks, thickness 0.05mm, annealed, 99.9%
钴, foil, 8mm disks, thickness 0.003mm, 99.9%
铬, bar, 100mm x 2mm x 2mm, 99.7+%
钴, foil, 6mm disks, thickness 0.01mm, 99.9%
钴, foil, 4mm disks, thickness 0.007mm, 99.9%
钴, foil, 8mm disks, thickness 0.01mm, 99.9%
钴, foil, 25x25mm, thickness 0.25mm, as rolled, 99.9%
钴, foil, light tested, 50x50mm, thickness 0.0125mm, 99.9%
钴, wire reel, 0.5m, diameter 0.05mm, hard, 99.9%
钴, foil, 25mm disks, thickness 0.125mm, annealed, 99.9%
铬, microfoil, disks, 10mm, thinness 0.025μm, specific density 18.21μg/cm2, permanent mylar 3.5μm support, 99.99+%
铬, rod, 25mm, diameter 5.0mm, 99.7+%
铬, foil, 100x100mm, thickness 3.0mm, hard, 99.95%