跳转至内容
Merck
CN
  • A validated dispersive liquid-liquid microextraction method for extraction of ochratoxin A from raisin samples.

A validated dispersive liquid-liquid microextraction method for extraction of ochratoxin A from raisin samples.

Journal of food science and technology (2015-04-02)
Rouhollah Karami-Osboo, Ramin Miri, Katayoun Javidnia, Farzad Kobarfard, Mohammad Hossein Shojaee AliAbadi, Mehdi Maham
摘要

A method based on dispersive liquid-liquid microextraction (DLLME) was developed for the quantitative extraction of Ochratoxin A (OTA) from raisin samples. The influence of various parameters on the recovery of OTA such as type and volume of DLLME extractant, centrifuging and sonication time, also volume of deionized water was investigated. Recovery values under the optimum conditions were between 68.6 and 85.2 %, the inner and intra-day precision expressed as relative standard deviation (RSD%, n = 3), were less than 15 % at spiking levels of 2.5-30 μg kg(-1). Linearity was studied from 0.5 to 30 μg L(-1), and the limits of detection (LOD) and quantification (LOQ) were 0.7 and 2.0 μg kg(-1), respectively. Real samples were analyzed by DLLME method and compared with confirmative immunoaffinity Column Chromatography (IAC) clean-up. Low cost, simplicity of operation, speed and minimum consumption of organic solvent were the main advantages of proposed method. The mean contamination of samples was 0.88 μg kg(-1) that was lower than European Legal Limit.

材料
产品编号
品牌
产品描述

Sigma-Aldrich
甲醇, suitable for HPLC, ≥99.9%
Sigma-Aldrich
丙酮, ACS reagent, ≥99.5%
Sigma-Aldrich
甲醇, ACS reagent, ≥99.8%
Sigma-Aldrich
丙酮, suitable for HPLC, ≥99.9%
Sigma-Aldrich
甲醇, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
丙酮, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%
Sigma-Aldrich
磷酸, ACS reagent, ≥85 wt. % in H2O
Sigma-Aldrich
甲醇, HPLC Plus, ≥99.9%
Sigma-Aldrich
丙酮, Laboratory Reagent, ≥99.5%
Sigma-Aldrich
磷酸, ACS reagent, ≥85 wt. % in H2O
Sigma-Aldrich
甲醇, anhydrous, 99.8%
Sigma-Aldrich
磷酸, 85 wt. % in H2O, 99.99% trace metals basis
Sigma-Aldrich
甲醇, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
甲醇, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
丙酮, suitable for HPLC, ≥99.8%
Sigma-Aldrich
丙酮, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.5% (GC)
Sigma-Aldrich
甲醇, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
甲醇, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
磷酸, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥85%
Sigma-Aldrich
磷酸, puriss. p.a., crystallized, ≥99.0% (T)
Sigma-Aldrich
甲醇, ACS reagent, ≥99.8%
Sigma-Aldrich
磷酸, crystalline, ≥99.999% trace metals basis
Sigma-Aldrich
丙酮, ACS reagent, ≥99.5%
Sigma-Aldrich
磷酸, puriss., meets analytical specification of Ph. Eur., BP, NF, FCC, 85.0-88.0%
Supelco
丙酮, analytical standard
USP
木精, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
甲醇, BioReagent, ≥99.93%
Supelco
甲醇, analytical standard
Sigma-Aldrich
磷酸 溶液, 85 wt. % in H2O, FCC, FG
Supelco
甲醇, Pharmaceutical Secondary Standard; Certified Reference Material