跳转至内容
Merck
CN
  • Hygienic treatment and energy recovery of dead animals by high solid co-digestion with vinasse under mesophilic condition: feasibility study.

Hygienic treatment and energy recovery of dead animals by high solid co-digestion with vinasse under mesophilic condition: feasibility study.

Journal of hazardous materials (2015-06-01)
Xiaohu Dai, Sisi Chen, Yonggang Xue, Lingling Dai, Ning Li, Junichi Takahashi, Wentao Zhao
摘要

In the present study, the feasibility of hygienic treatment and energy recovery of dead animals (pork as an experimental alternative) by high solid co-digestion with vinasse under mesophilic condition was investigated. A lab-scale digester was operated for 125 days with SRT of 20 days. The volatile solid (VS) reduction, biogas yield, and CH4 content finally achieved stability after two obvious fluctuations, and were 55±1%, 0.40±0.02 m(3)/kg VS feed and 68%, respectively. Meanwhile, the shifts of microbial communities of the samples taken on typical days with different performance (day 40 (stable), day 65 (deteriorated), day 75 (in recovery), day 90 (recovered) and day 110 (stable)) were monitored by the application of pyrosequencing technology and the bioinformatical analysis with QIIME 1.8. In consequence, the details of changes in bacterial and archaeal communities elaborately explained the intrinsic reasons for the deterioration and recovery of the digester, and provided the proofs for the feasibility of hygienic treatment and energy recovery of dead animals by high solid co-digestion with vinasse under mesophilic condition.

材料
产品编号
品牌
产品描述

Sigma-Aldrich
碳,介孔, less than 100 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
碳,介孔, nanopowder, less than 500 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
碳,介孔
Sigma-Aldrich
石墨化碳, nanopowder, graphitized, less than 250 ppm Al, Ti, Fe, Ni, Cu, and Zn combined
Sigma-Aldrich
甲烷-12C, 13C-去除, 99.99 atom % 12C
Carbon - Vitreous, rod, 100mm, diameter 5.0mm, glassy carbon
Carbon - Vitreous, foam, 150x150mm, thickness 2.5mm, bulk density 0.05g/cm3, porosity 96.5%
Carbon - Vitreous, foil, 25x25mm, thickness 0.5mm, glassy carbon
Carbon - Vitreous, rod, 100mm, diameter 3.0mm, glassy carbon
Carbon - Vitreous, rod, 5mm, diameter 3.0mm, glassy carbon
Carbon - Vitreous, foam, 150x150mm, thickness 3.2mm, bulk density 0.05g/cm3, porosity 96.5%
Carbon - Vitreous, tube, 100mm, outside diameter 10mm, inside diameter 3mm, wall thickness 3.5mm, glassy carbon
Carbon - Vitreous, rod, 50mm, diameter 1.0mm, glassy carbon
Carbon - Vitreous, foam, 150x150mm, 0.05g.cmué, porosity 96.5%, 24 pores/cm
Carbon - Vitreous, foil, 50x50mm, thickness 1.0mm, glassy carbon
Carbon - Vitreous, foil, 10x10mm, thickness 1.0mm, glassy carbon
Carbon - Vitreous, rod, 200mm, diameter 1.0mm, glassy carbon
Carbon - Vitreous, rod, 200mm, diameter 5.0mm, glassy carbon
Carbon - Vitreous, foil, 10x10mm, thickness 4.0mm, glassy carbon
Carbon - Vitreous, tube, 50mm, outside diameter 10mm, inside diameter 3mm, wall thickness 3.5mm, glassy carbon
Carbon - Vitreous, rod, 100mm, diameter 1.0mm, glassy carbon
Carbon - Vitreous, rod, 100mm, diameter 7.0mm, glassy carbon
Carbon - Vitreous, foam, 300x300mm, thickness 30mm, bulk density 0.05g/cm3, porosity 96.5%
Carbon - Vitreous, foil, 100x100mm, thickness 2.0mm, glassy carbon
Carbon - Vitreous, foil, 25x25mm, thickness 4.0mm, glassy carbon
Carbon - Vitreous, rod, 200mm, diameter 3.0mm, glassy carbon
Carbon - Vitreous, foam, 300x300mm, thickness 20mm, bulk density 0.05g/cm3, porosity 96.5%
Carbon - Vitreous, foil, 100x100mm, thickness 1.0mm, glassy carbon
Carbon - Vitreous, foil, 100x100mm, thickness 6.0mm, glassy carbon
Carbon - Vitreous, foil, 50x50mm, thickness 4.0mm, glassy carbon