Skip to Content
Merck
CN
  • Hepcidin determination in dried blood by microfluidic LC-MS/MS: comparison of DBS and volumetric absorptive microsampling for matrix effect and recovery.

Hepcidin determination in dried blood by microfluidic LC-MS/MS: comparison of DBS and volumetric absorptive microsampling for matrix effect and recovery.

Bioanalysis (2015-11-26)
Virginie Houbart, Gaël Cobraiville, Anne-Catherine Servais, Aurore Napp, Marie-Paule Merville, Marianne Fillet
ABSTRACT

Dried blood analysis experiences a growing interest due to practical, ethical and financial advantages compared with classical wet plasma or serum analysis. Besides classical DBS, new alternatives are commercialized as volumetric absorptive microsampling (VAMS) that are expected to overcome hematocrit influence. The feasibility of hepcidin (a peptide hormone) extraction and determination from DBS and VAMS blood sampling was investigated. Experimental design was used to determine the optimal extraction conditions. Matrix effect and extraction recovery were studied and a special attention was paid to phospholipid removal. The data suggest that the combination of VAMS and phospholipid removal plates provides low matrix effect and high sensitivity, and constitutes an easy and promising protocol for hepcidin analysis.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
meso-2,3-Dimercaptosuccinic acid, ~98%
Sigma-Aldrich
Ethylenediaminetetraacetic acid solution, 0.02% in DPBS (0.5 mM), sterile-filtered, BioReagent, suitable for cell culture
Sigma-Aldrich
Ethylenediaminetetraacetic acid, 99.995% trace metals basis
Sigma-Aldrich
Dimethyl sulfide, ≥99%, FCC, FG
Sigma-Aldrich
Dimethyl sulfide, ≥99%
Sigma-Aldrich
Dimethyl sulfide, anhydrous, ≥99.0%
Sigma-Aldrich
Ethylenediaminetetraacetic acid, ACS reagent, 99.4-100.6%, powder
Sigma-Aldrich
Ethylenediaminetetraacetic acid, BioUltra, anhydrous, ≥99% (titration)
Sigma-Aldrich
Ethylenediaminetetraacetic acid, anhydrous, crystalline, BioReagent, suitable for cell culture
Sigma-Aldrich
Ethylenediaminetetraacetic acid, purified grade, ≥98.5%, powder
Sigma-Aldrich
Trifluoroacetic acid, ≥99%, for protein sequencing
Sigma-Aldrich
Trifluoroacetic acid, puriss. p.a., suitable for HPLC, ≥99.0% (GC)
Sigma-Aldrich
Trifluoroacetic acid, ReagentPlus®, 99%
Sigma-Aldrich
Trifluoroacetic acid, ReagentPlus®, 99%
Sigma-Aldrich
Dimethyl sulfide, natural, ≥99%, FCC, FG
Sigma-Aldrich
Ethylenediaminetetraacetic acid, Vetec, reagent grade, 98%