Skip to Content
Merck
CN
  • Preparation of polyclonal antibodies for nateglinide (NTG) and development of a sensitive chemiluminescent immunoassay to detect NTG in tablets and serum.

Preparation of polyclonal antibodies for nateglinide (NTG) and development of a sensitive chemiluminescent immunoassay to detect NTG in tablets and serum.

Talanta (2015-12-24)
Lei Zheng, Jing Wang, Jie Zhang, Zhaorui Song, Yaqing Dong, Yufen Wang, Zhongsheng Tong, Chuan Deng, Yongmei Yin, Meng Meng, Rimo Xi
ABSTRACT

In this study, we prepared polyclonal antibodies against anti-diabetic drug nateglinide (NTG), and established a sensitive chemiluminescent immunoassay (CLIA) to detect NTG in tablets and serum. Two kinds of immunogens were synthesized using ethylcarbodiimide (EDC)/hydroxysuccinimide (NHS) and carbonyldiimidazole (CDI)/4-dimethylaminopyridine (DMAP) as coupling reagents respectively. When activated by EDC/NHS, more molecules of NTG coupled with carrier protein in immunogens. A horseradish peroxidase (HRP)-luminol-H2O2 system with p-iodophenol enhancement was applied in the CLIA analysis. The antibodies in EDC/NHS group showed higher titer, sensitivity and wider detection linear range than those in CDI/DMAP group, and were chosen for next studies. The developed CLIA assay exhibited good selectivity towards NTG among structually similar analogs. The method could detect as low as 0.35 ng mL(-1) NTG in buffer, 2.1 ng mL(-1) NTG in serum and 0.84 ng mL(-1) NTG in tablets. The CLIA method provided consistent results with HPLC method (r=0.9986) in determination of NTG from 5.0 to 400 µg mL(-1). The CLIA method could detect 78 samples in one assay, and the samples need only dilution in pretreatment. As a summary, this research offers a sensitive assay for high-throughout screening of NTG in formulation control and pharmacokinetic studies.

MATERIALS
Product Number
Brand
Product Description

Supelco
Hydrochloric acid solution, volumetric, 0.1 M HCl (0.1N), endotoxin free
Sigma-Aldrich
3,3′,5,5′-Tetramethylbenzidine, ≥99%
Sigma-Aldrich
3,3′,5,5′-Tetramethylbenzidine, ≥98.0% (NT)
Sigma-Aldrich
3,3′,5,5′-Tetramethylbenzidine, tablet, 1 mg substrate per tablet
Sigma-Aldrich
3,3′,5,5′-Tetramethylbenzidine, ≥98% (TLC)
Sigma-Aldrich
CDI, reagent grade
Sigma-Aldrich
CDI, ≥97.0% (T)
Sigma-Aldrich
Hydrogen chloride solution, 1.0 M in acetic acid
Sigma-Aldrich
Hydrochloric acid, ACS reagent, 37%
Sigma-Aldrich
Hydrochloric acid, puriss., 24.5-26.0%
Sigma-Aldrich
Hydrochloric acid, meets analytical specification of Ph. Eur., BP, NF, fuming, 36.5-38%
Sigma-Aldrich
Hydrochloric acid solution, for amino acid analysis, ~6 M in H2O
Sigma-Aldrich
Hydrochloric acid, ACS reagent, 37%
Sigma-Aldrich
Hydrochloric acid solution, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
Hydrochloric acid, 37 wt. % in H2O, 99.999% trace metals basis
Sigma-Aldrich
Hydrochloric acid, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., fuming, ≥37%, APHA: ≤10
Sigma-Aldrich
Hydrochloric acid, 36.5-38.0%, BioReagent, Molecular Biology
Sigma-Aldrich
Hydrochloric acid solution, 32 wt. % in H2O, FCC
Sigma-Aldrich
Picrylsulfonic acid solution, 5 % (w/v) in H2O, BioReagent, suitable for determination of primary amines
Sigma-Aldrich
4-Iodophenol, 99%
Sigma-Aldrich
Luminol, ≥97% (HPLC)
Sigma-Aldrich
Luminol, 97%
Sigma-Aldrich
1,2-Dichloroethane, anhydrous, 99.8%
Sigma-Aldrich
1,2-Dichloroethane, ACS reagent, ≥99.0%
Sigma-Aldrich
4-(Dimethylamino)pyridine, ReagentPlus®, ≥99%
Sigma-Aldrich
N-Hydroxysuccinimide, 98%