Skip to Content
Merck
CN
  • Highly Sensitive Immunochromatographic Identification of Tetracycline Antibiotics in Milk.

Highly Sensitive Immunochromatographic Identification of Tetracycline Antibiotics in Milk.

International journal of analytical chemistry (2015-12-23)
N A Taranova, A S Kruhlik, E A Zvereva, V V Shmanai, I I Vashkevich, D A Semyonov, S A Eremin, A V Zherdev, B B Dzantiev
ABSTRACT

A rapid immunochromatographic assay was developed for the control of tetracycline (TC). The assay is based on the competition between immobilized TC-protein conjugate and TC in a tested sample for binding with polyclonal anti-TC antibodies conjugated to colloidal gold during the flow of the sample along a membrane strip with immobilized reactants. Conjugation of colloidal gold and the total immunoglobulin (IgG) fraction of polyclonal antibodies was used to increase the assay sensitivity to ensure low content of specific antibodies in the conjugate. This allowed effective inhibition of free TC and conjugate binding in the strip test zone. Photometric marker registration allows control of the reduction of binding, thereby enhancing detection sensitivity. The proposed assay allows TC to be detected at concentrations up to 20 ng/mL, exceeding the limit of detection of the known analogues, in a wide working range (more than two orders) of 60 pg/mL to 10 ng/mL, ensured through the use of polyclonal antibodies. The assay time is 10 min. The efficiency of the designed assay is shown to identify TC in milk; the degree of recovery of TC ranges from 90 to 112%. The precision of the concentrations measurements was no more than 10%.

MATERIALS
Product Number
Brand
Product Description

SAFC
Formaldehyde solution, contains 10-15% methanol as stabilizer, 37 wt. % in H2O
Sigma-Aldrich
Formaldehyde solution, ACS reagent, 37 wt. % in H2O, contains 10-15% Methanol as stabilizer (to prevent polymerization)
Supelco
Formaldehyde solution, stabilized with methanol, ~37 wt. % in H2O, certified reference material
Sigma-Aldrich
3,3′,5,5′-Tetramethylbenzidine, ≥98% (TLC)
Sigma-Aldrich
3,3′,5,5′-Tetramethylbenzidine, ≥98.0% (NT)
Sigma-Aldrich
Formaldehyde-12C solution, 20% in H2O, 99.9 atom % 12C
Sigma-Aldrich
Sodium azide, ReagentPlus®, ≥99.5%
Sigma-Aldrich
3,3′,5,5′-Tetramethylbenzidine, tablet, 1 mg substrate per tablet
Sigma-Aldrich
3,3′,5,5′-Tetramethylbenzidine, ≥99%
Sigma-Aldrich
Formaldehyde solution, meets analytical specification of USP, ≥34.5 wt. %
Sigma-Aldrich
Sodium azide, BioXtra
Sigma-Aldrich
Formaldehyde solution, Molecular Biology, BioReagent, ≥36.0% in H2O (T)
Sigma-Aldrich
Formaldehyde solution, Molecular Biology, 36.5-38% in H2O
Sigma-Aldrich
Dimethyl sulfoxide, sterile-filtered, BioPerformance Certified, meets EP, USP testing specifications, suitable for hybridoma
Sigma-Aldrich
Dimethyl sulfoxide, Molecular Biology
Sigma-Aldrich
Dimethyl sulfoxide, Hybri-Max, sterile-filtered, BioReagent, suitable for hybridoma, ≥99.7%
Sigma-Aldrich
Dimethyl sulfoxide, PCR Reagent
Sigma-Aldrich
Dimethyl sulfoxide, ≥99.5% (GC), suitable for plant cell culture
Sigma-Aldrich
Triton X-100, laboratory grade
Sigma-Aldrich
Dimethyl sulfoxide, meets EP testing specifications, meets USP testing specifications
Sigma-Aldrich
Dimethyl sulfoxide, BioUltra, Molecular Biology, ≥99.5% (GC)
Sigma-Aldrich
8-Octanoyloxypyrene-1,3,6-trisulfonic acid trisodium salt, suitable for fluorescence, ≥90% (HPCE)
Sigma-Aldrich
Dimethyl sulfoxide, anhydrous, ≥99.9%
Sigma-Aldrich
Dimethyl sulfoxide, ACS reagent, ≥99.9%
Sigma-Aldrich
Dimethyl sulfoxide, puriss. p.a., dried, ≤0.02% water
Sigma-Aldrich
Dimethyl sulfoxide, puriss. p.a., ACS reagent, ≥99.9% (GC)
Sigma-Aldrich
Dimethyl sulfoxide, ReagentPlus®, ≥99.5%
Sigma-Aldrich
Dimethyl sulfoxide, Vetec, reagent grade, 99%