description
Coverage: 305 cm2/g (using a 230 mesh stainless steel screen), Cured Thickness: 15 micron (printed through 230 stainless steel mesh with 13 micron emulsion), Sheet resistivity: < 50Ω/square at 25 μm (printed through 230 stainless steel mesh with 13 micron emulsion)
form
paste
composition
Solid content, 39-41% (at 130°C)
viscosity
2.0-3.5 Pa.s (Haake RS1 C20/2º TiL at 230 sec-1 at 25 °C.)
General description
Carbon/graphite screen printing paste is a carbon containing ink that can be used in the formation of working and counter electrodes. The electrode formed can be modified using an ionophore to obtain good cathodic peaks and cyclic voltammetric values. These electrodes can further be used in the fabrication of electrochemical devices.
This product is designed to be used for screen-printing working electrodes. This ink has been optimised to give superior electrochemical performance. It combines good line definition and good electrochemical performance with good reversibility when using cyclic voltammetry.
Application
Carbon/graphite screen printing paste can be coated on flexible substrates for the formation of electrochemical sensors for biological detection.
Features and Benefits
This ink can be used in conjunction with UV dielectrics and ink is fast drying.
Preparation Note
PROCESSING:
PRODUCT MUST BE STIRRED PRIOR TO USE.
Screen Printing Equipment: Semi-Automatic, manual
Ink Screen Life: >3 hours
Screen Types: Stainless steel, polyester, mesh 156-230 tpi
Typical Drying Conditions :
For box-oven drying, 60 °C for 30 minutes or 80 °C for 10-15 minutes
For belt-drier ovens, 130 °C for 10 minutes of element exposure
Clean-up solvent : ethoxy propanol or sericol
Substrate: polyester, PVC, polycarbonate or ceramic.
PRODUCT MUST BE STIRRED PRIOR TO USE.
Screen Printing Equipment: Semi-Automatic, manual
Ink Screen Life: >3 hours
Screen Types: Stainless steel, polyester, mesh 156-230 tpi
Typical Drying Conditions :
For box-oven drying, 60 °C for 30 minutes or 80 °C for 10-15 minutes
For belt-drier ovens, 130 °C for 10 minutes of element exposure
Clean-up solvent : ethoxy propanol or sericol
Substrate: polyester, PVC, polycarbonate or ceramic.
Legal Information
Product of Gwent Electronic Materials Ltd (GEM), part of Sun Chemical Corporation.
signalword
Danger
hcodes
Hazard Classifications
Carc. 2 - Eye Dam. 1 - Flam. Liq. 3 - Skin Irrit. 2 - STOT SE 3
target_organs
Respiratory system
存储类别
3 - Flammable liquids
wgk
WGK 2
flash_point_f
114.8 °F - closed cup
flash_point_c
46 °C - closed cup
法规信息
危险化学品
此项目有
Pseudo Cavity of Schiff Base Ionophore Incorporated in Screen Printed Electrode for Sensing of Zn (II)
Rana S, et al.
Journal of the Electrochemical Society, 166(6), B464-B471 (2019)
Electrochemical determination of antihypertensive drugs by employing costless and portable unmodified screen-printed electrodes
Khorshed AA, et al.
Talanta, 198(6), 447-456 (2019)
Forensic electrochemistry: simultaneous voltammetric detection of MDMA and its fatal counterpart "Dr Death" (PMA)
Cumba L R, et al.
Analytical Methods : Advancing Methods and Applications, 8(1), 142-152 (2016)
Highly sensitive screen printed strain sensors on flexible substrates via ink composition optimization
Anderson N, et al.
Sensors and actuators A, Physical, 290(6), 1-7 (2019)
Christos Kokkinos et al.
Analytical chemistry, 88(13), 6897-6904 (2016-06-04)
This work describes a new type of integrated lab-on-a-membrane foldable device suitable for on-site duplex electrochemical biosensing using drop-size sample volumes. The devices are fabricated entirely by screen-printing on a nylon membrane and feature two assay zones which are located
商品
Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持