description
Breakdown Voltage (DC): 3100 V/mil, Max. Service Temp.: 175°C, Specific Gravity: 1.26-1.27, Theoretical Coverage: 32-35 m2/kg/mil, Volume Resistivity: >1014 ohm.cm
form
liquid
color
green
viscosity
20-30 poise (Brookfield CAP @25 °C)
storage temp.
2-8°C
General description
DSU4606G is a flexible, green UV curing dielectric designed to be screen printed as an insulating layer for crossovers in membrane switches and a variety of electronic & Printed circuitry constructions.
DSU4606G has excellent adhesion to both treated and untreated PET. It also adheres to a variety of substrates including PC, PI, glass, and ITO.
DSU4606G has excellent adhesion to both treated and untreated PET. It also adheres to a variety of substrates including PC, PI, glass, and ITO.
Drying/Curing
DSU4606G can be cured with a 200-300 Watt/inch (80-120 Watt/cm) medium-pressure Mercury vapor arc lamps, or microwave initiated D-bulb equivalents. Optimum UV dosage should be around 650 mJ/cm2.
DSU4606G can be cured with a 200-300 Watt/inch (80-120 Watt/cm) medium-pressure Mercury vapor arc lamps, or microwave initiated D-bulb equivalents. Optimum UV dosage should be around 650 mJ/cm2.
Typical Cured Deposits:
196 threads/inch (77 threads/cm): 0.6-0.8 mil
305 threads/inch (120 threads/cm): 0.3-0.5 mil
DSU4606G must be shielded from sunlight or high-intensity light to prevent on-screen curing during prolonged production stoppages.
Cleaning with thinner followed by cleaning with acetone is recommended
196 threads/inch (77 threads/cm): 0.6-0.8 mil
305 threads/inch (120 threads/cm): 0.3-0.5 mil
DSU4606G must be shielded from sunlight or high-intensity light to prevent on-screen curing during prolonged production stoppages.
Cleaning with thinner followed by cleaning with acetone is recommended
Application
DSU4606G is supplied ready for use, but should be lightly stirred before use. It should not require reducing.
DSU4606G is suitable for use on hand; semi-automatic or fully automatic screen printing machines. Polyester or Stainless screens with mesh count 196-305 threads/inch (77-120 threads/cm) can be used depending on desired ink film thickness. Printing two layers is recommended for maximum dielectric properties and to minimize voids. A total cured deposit of 0.75-2.0 mil may be required to meet specific insulation targets.
DSU4606G is suitable for use on hand; semi-automatic or fully automatic screen printing machines. Polyester or Stainless screens with mesh count 196-305 threads/inch (77-120 threads/cm) can be used depending on desired ink film thickness. Printing two layers is recommended for maximum dielectric properties and to minimize voids. A total cured deposit of 0.75-2.0 mil may be required to meet specific insulation targets.
Legal Information
SunTronic is a registered trademark of Sun Chemical, Inc.
signalword
Warning
hcodes
Hazard Classifications
Eye Irrit. 2 - Skin Irrit. 2 - Skin Sens. 1
存储类别
10 - Combustible liquids
wgk
WGK 3
flash_point_c
> 110.5 °C
法规信息
新产品
此项目有
商品
Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持