material
Millistak+® media, TPE seal, polypropylene
manufacturer/tradename
Clarisolve®
parameter
1.0 bar max. differential pressure (15 psid) at ≤80 °C (Forward), 1.0 bar max. differential pressure (15 psid) at ≤80 °C (Maximum), 2.1 bar max. differential pressure (30 psid) at ≤25 °C (Forward), 2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse), 3.5 bar max. differential pressure (50 psid) at ≤25 °C (Maximum)
H
32 cm (12.5 in.)
L
62 cm (24.2 in.)
W
3.0 cm (1.2 in.)
filtration area
0.11 m2
impurities
<0.25 EU/mL (LAL test, Aqueous extraction)
total organic carbon (TOC) residue
1.4-2.1 μg/L
input
sample type liquid
conductivity
0.80-1.59 μS/cm
正在寻找类似产品? 访问 产品对比指南
General description
product water; post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. A sample of filtrate was pulled every 2 minutes during flush and tested for conductivity.
Application
High-density cell cultures
Features and Benefits
Filter Grade: 20MS
Preparation Note
Sterilization Method
Integrity is maintained after 1 autoclave cycle of 60 minutes at 123 °C.
Integrity is maintained after 1 autoclave cycle of 60 minutes at 123 °C.
Analysis Note
Total organic carbon (TOC) residue: Post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. At the end of the flush, a sample was pulled for TOC typical values.
Legal Information
CLARISOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLISTAK+ is a registered trademark of Merck KGaA, Darmstadt, Germany
存储类别
13 - Non Combustible Solids
wgk
nwg
flash_point_f
Not applicable
flash_point_c
Not applicable
法规信息
新产品
此项目有
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持