material
PVDF , polypropylene , polypropylene support, silicone seal
reg. compliance
meets EU framework regulation [1935/2004/EC] (all component materials; regarding materials and articles intended to contact food), meets FDA Indirect Food Additive requirements cited in 21 CFR 177-182 (all component materials)
sterility
sterile
feature
hydrophilic
manufacturer/tradename
Vitipore®
parameter
≤17.1 mL/min air diffusion at 1.5 bar (22 psig) and 23 °C (in water), 0.35 bar max. differential pressure (5 psid) at 109 °C (Forward), 1.7 bar max. differential pressure (25 psid) at 80 °C (Forward), 3.5 bar max. differential pressure (50 psid) at 25 °C (Reverse; intermittent), 5.5 bar max. differential pressure (80 psid) at 25 °C (Forward)
cartridge nominal length
10 in. (25 cm)
diam.
6.9 cm (2.7 in.)
filtration area
0.78 m2
gravimetric extractables
≤23 mg/cartridge
matrix
Vitipore® II
pore size
0.45 μm nominal pore size, 0.45 μm pore size
input
sample type liquid
sample type food(s)
sample type bottled water
sample type beverage(s)
sample type beer
sample type wine
bubble point
≥1930 mbar (28 psig), air with water at 23 °C
cartridge code
Code 7 (2-226; O-rings w/locking-tabs)
General description
Preparation Note
100 SIP cycles of 30 min @ 109 °C; hot water sanitized 50 times for 30 min @ 80 °C maximum
Analysis Note
Other Notes
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore® Membrane user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal Information
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持