推荐产品
物料
polyethersulfone membrane
polyethylene support
polypropylene (gamma-stable)
polypropylene housing
polypropylene vent cap
polysulfone
silicone seal
质量水平
无菌性
irradiated
non-sterile
灭菌适用性
gamma compatible
产品线
Opticap® XL 300
特点
hydrophobic
制造商/商品名称
Opticap®
参数
2.1 bar max. differential pressure (30 psid) at 25 °C (Reverse; intermittent)
25 °C max. inlet temp.
4.1 bar max. inlet pressure (60 psi) at 23 °C
4.2 bar max. differential pressure (60 psid) at 25 °C (Forward)
60 psi max. differential pressure (4.1 bar) (continuous)
60 psig max. inlet pressure
技术
gas filtration: suitable
长度
11.9 cm (4.7 in.)
直径
5.6 cm (2.2 in.)
过滤面积
0.048 m2
入口接头直径
3/4 in.
入口至出口宽度
11.9 cm (4.7 in.)
出口接头直径
3/4 in.
杂质
≤0.25 EU/mL (LAL test, Aqueous extraction)
<0.25 EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)
重量萃取物
≤3 mg
基质
Millipore Express® SPG
孔径
0.2 μm pore size
泡点
≥1210 mbar (17.5 psig), air with 70/30% IPA/water at 23 °C
配件
1/4 in. drain/vent hose barb (with double O-ring seal)
inlet sanitary flange
outlet sanitary flange
(19 mm (3/4 in.) Sanitary Flange Inlet and Outlet)
运输
ambient
正在寻找类似产品? 访问 产品对比指南
相关类别
一般描述
包装
其他说明
- Organism Retention: Microorganism
- Mode of Action: Filtration (size exclusion)
- Application: BioProcessing
- Intended Use: Reduction or removal of microorganism/bioburden
- Instructions for Use: Please refer Wetting Instructions for Filter Units with Durapore® Membrane user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
制备说明
Gamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable
分析说明
Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
After gamma irradiation and three autoclave cycles, the TOC was measured to be equal to or less than 3367 µg/device.
法律信息
免责声明
法规信息
我们的科学家团队拥有各种研究领域经验,包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系技术服务部门