form
solid
quality
dry
packaging
bucket of 1000 g
technique(s)
AAS: suitable, LPLC: suitable
surface area
1100 m2/g
impurities
≤5% moisture content
matrix
styrene/divinylbenzene (macroporous)
matrix active group
polymer
particle size
20-50 mesh
pore size
1.16 mL/g pore volume, 46 Å mean pore size
separation technique
reversed phase
General description
Dowex Optipore® V-493 is a polystyrene-divinylbenzene hydrophobic resin. It has large surface area, exhibit high capacity for organic compounds and with good desorption properties, performs better at low metal concentrations.
Application
DOWEX OPTIPORE® L493 的干燥型，适于气态应用：挥发性有机物和危害性空气污染物。该树脂的疏水性强于活性炭，且不具有催化活性。过去被称为 XUS-43493.01。
Dowex Optipore® V-493 was used in determination of cadmium(II) and lead(II) after their solid phase extraction as dibenzyldithiocarbamate chelates by flame atomic absorption spectrometry.
Legal Information
DOWEX OPTIPORE is a registered trademark of The Dow Chemical Company or an affiliated company of Dow
存储类别
13 - Non Combustible Solids
wgk
WGK 3
flash_point_f
Not applicable
flash_point_c
Not applicable
法规信息
新产品
此项目有
Irina Komjarova et al.
Analytica chimica acta, 576(2), 221-228 (2007-08-29)
Three major types of pre-concentration methods were evaluated and optimised for the extraction and determination of Cd, Cu, Ni, Pb and Zn from seawater samples. The traditional APDC/DDDC-Freon liquid-liquid extraction method showed excellent results for a multi-elemental analysis. However, the
Esra Melek et al.
Analytica chimica acta, 578(2), 213-219 (2007-08-29)
An enrichment procedure for cadmium and lead after their solid phase extraction as dibenzyldithiocarbamate chelates on Dowex Optipore V-493 has been established prior to their flame atomic absorption spectrometric determinations. The analytical parameters including pH, amounts of dibenzyldithiocarbamate, sample volume
我们的科学家团队拥有各种研究领域经验，包括生命科学、材料科学、化学合成、色谱、分析及许多其他领域.
联系客户支持