跳转至内容
Merck
CN

Citric acid assisted phytoremediation of cadmium by Brassica napus L.

Ecotoxicology and environmental safety (2014-05-21)
Sana Ehsan, Shafaqat Ali, Shamaila Noureen, Khalid Mahmood, Mujahid Farid, Wajid Ishaque, Muhammad Bilal Shakoor, Muhammad Rizwan
摘要

Phytoextraction is an eco-friendly and cost-effective technique for removal of toxins, especially heavy metals and metalloids from contaminated soils by the roots of high biomass producing plant species with subsequent transport to aerial parts. Lower metal bioavailability often limits the phytoextraction. Organic chelators can help to improve this biological technique by increasing metal solubility. The aim of the present study was to investigate the possibility of improving the phytoextraction of Cd by the application of citric acid. For this purpose, plants were grown in hydroponics under controlled conditions. Results indicated that Cd supply significantly decreased the plant growth, biomass, pigments, photosynthetic characteristics and protein contents which were accompanied by a significant increase in Cd concentration, hydrogen peroxide (H₂O₂), electrolyte leakage, malondialdehyde (MDA) accumulation and decrease in antioxidant capacity. The effects were dose dependent with obvious effects at higher Cd concentration. Application of CA significantly enhanced Cd uptake and its accumulation in plant roots, stems and leaves. Citric acid alleviated Cd toxicity by increasing plant biomass and photosynthetic and growth parameters alone and in combination with Cd and by reducing oxidative stress as observed by reduction in MDA and H₂O₂ production and decreased electrolyte leakage induced by Cd stress. Application of CA also enhanced the antioxidant enzymes activity alone and under Cd stress. Thus, the data indicate that exogenous CA application can increase Cd uptake and minimize Cd stress in plants and may be beneficial in accelerating the phytoextraction of Cd through hyper-accumulating plants such as Brassica napus L.

材料
产品编号
品牌
产品描述

Sigma-Aldrich
无水柠檬酸粉末, meets analytical specification of Ph. Eur., BP, USP, E330, anhydrous, 99.5-100.5% (based on anhydrous substance)
Sigma-Aldrich
无水柠檬酸粉末, ACS reagent, ≥99.5%
Sigma-Aldrich
无水柠檬酸粉末, ≥99.5%, FCC, FG
Sigma-Aldrich
无水柠檬酸粉末, 99%
Sigma-Aldrich
无水柠檬酸粉末, anhydrous, suitable for cell culture, suitable for plant cell culture
Supelco
柠檬酸, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
无水柠檬酸粉末, BioUltra, anhydrous, ≥99.5% (T)
USP
无水柠檬酸粉末, United States Pharmacopeia (USP) Reference Standard
Sigma-Aldrich
无水柠檬酸粉末, anhydrous, free-flowing, Redi-Dri, ACS reagent, ≥99.5%
Sigma-Aldrich
镉, granular, 30-80 mesh, ≥99%
Sigma-Aldrich
镉, powder, −100 mesh, 99.5% trace metals basis
Sigma-Aldrich
镉, granular, ≥99%, 5-20 mesh
Supelco
无水柠檬酸粉末, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
无水柠檬酸粉末, anhydrous, European Pharmacopoeia (EP) Reference Standard
Sigma-Aldrich
镉, shot, 3 mm, 99.999% trace metals basis
镉, foil, 100x100mm, thickness 1.0mm, as rolled, 99.99%
镉, foil, 10mm disks, thickness 1.0mm, as rolled, 100%
镉, rod, 100mm, diameter 40mm, 99.9%
镉, rod, 25mm, diameter 40mm, 99.9%
镉, rod, 100mm, diameter 10.0mm, 99.999%
镉, foil, 100x100mm, thickness 0.25mm, as rolled, 99.99+%
Sigma-Aldrich
无水柠檬酸粉末, Vetec, reagent grade, 99%
镉, foil, 2m coil, thickness 0.5mm, as rolled, 100%
镉, wire reel, 1m, diameter 1.2mm, as drawn, 99.99+%
镉, rod, 200mm, diameter 10.0mm, 99.999%
镉, foil, 25x25mm, thickness 0.5mm, as rolled, 99.999%
镉, foil, 50x50mm, thickness 0.25mm, as rolled, 99.9%
镉, foil, 150x150mm, thickness 0.5mm, as rolled, 99.99%
镉, foil, 30x50mm, thickness 0.5mm, as rolled, 99.999%
镉, foil, 50x50mm, thickness 0.125mm, as rolled, 99.99+%