Merck
CN
  • Using the hemoglobin content of reticulocytes (RET-He) to evaluate anemia in patients with cancer.

Using the hemoglobin content of reticulocytes (RET-He) to evaluate anemia in patients with cancer.

American journal of clinical pathology (2014-09-23)
Ellinor I B Peerschke, Melissa S Pessin, Peter Maslak
摘要

Evaluation of anemia, particularly iron deficiency, in patients with cancer is difficult. This study examined using the hemoglobin content of reticulocytes (RET-He) to rule out iron deficiency, as defined by serum iron studies (transferrin saturation <20%, serum iron <40 μg/dL, and ferritin <100 ng/mL), in an unselected cancer patient population. Patients were entered into the study based on the existence of concurrent laboratory test requests for CBC and serum iron studies. Using a threshold of 32 pg/cell, RET-He ruled out iron deficiency with a negative predictive value (NPV) of 98.5% and 100%, respectively, in the study population (n = 209) and in a subpopulation of patients with low reticulocyte counts (n = 19). In comparison, the NPV of traditional CBC parameters (hemoglobin, <11 g/dL; mean corpuscular volume, <80 fL) was only 88.5%. These results support the use of RET-He in the evaluation of iron deficiency in a cancer care setting.

材料
货号
品牌
产品描述

Sigma-Aldrich
铁, ≥99%, reduced, powder (fine)
Sigma-Aldrich
铁蛋白 来源于马脾脏, Type I, saline solution
Sigma-Aldrich
羰基铁, ≥97% Fe basis
Sigma-Aldrich
铁, powder, −325 mesh, 97%
Sigma-Aldrich
铁, granular, 10-40 mesh, >99.99% trace metals basis
Sigma-Aldrich
铁, puriss. p.a., carbonyl-Iron powder, low in magnesium and manganese compounds, ≥99.5% (RT)
Sigma-Aldrich
铁, chips, 99.98% trace metals basis
Sigma-Aldrich
铁, foil, thickness 0.1 mm, ≥99.9% trace metals basis
Sigma-Aldrich
铁蛋白 来源于人类肝脏, Type IV, 10 μg/mL
Sigma-Aldrich
铁, wire, diam. 1.0 mm, ≥99.9% trace metals basis
Sigma-Aldrich
铁, foil, thickness 0.25 mm, ≥99.99% trace metals basis
铁, IRMM®, certified reference material, 0.5 mm wire
铁, foil, 100x100mm, thickness 0.25mm, hard, 99.5%
铁, foil, 100x100mm, thickness 0.125mm, as rolled, 99.99+%
铁, rod, 150mm, diameter 6.0mm, as drawn, 99.99+%
铁, rod, 150mm, diameter 5.0mm, as drawn, 99.99+%
铁, rod, 100mm, diameter 100mm, as drawn, armcO« soft ingot 99.8%
铁, rod, 100mm, diameter 2.0mm, as drawn, 99.95%
铁, foil, 10mm disks, thickness 0.01mm, 99.85%
铁, foil, 15mm disks, thickness 0.0125mm, 99.99+%
铁, foil, 300x300mm, thickness 3.0mm, as rolled, 99.5%
铁, foil, light tested, 100x100mm, thickness 0.015mm, 99.85%
铁, foil, 150x150mm, thickness 1.5mm, as rolled, 99.5%
铁, foil, not light tested, 100x100mm, thickness 0.015mm, 99.99+%
铁, foil, 25mm disks, thickness 0.003mm, 99.85%
铁, foil, 100x100mm, thickness 2.0mm, as rolled, 99.95%
铁, foil, 150x150mm, thickness 0.125mm, hard, 99.5%
铁, foil, 25x25mm, thickness 1.0mm, as rolled, 99.99+%
铁, foil, 4mm disks, thickness 0.0125mm, 99.99+%
铁, rod, 1000mm, diameter 2.0mm, as drawn, 99.95%