跳转至内容
Merck
CN
  • Is tantalum protective against infection in revision total hip arthroplasty?

Is tantalum protective against infection in revision total hip arthroplasty?

The bone & joint journal (2015-01-09)
A T Tokarski, T A Novack, J Parvizi
摘要

We hypothesised that the use of tantalum (Ta) acetabular components in revision total hip arthroplasty (THA) was protective against subsequent failure due to infection. We identified 966 patients (421 men, 545 women and 990 hips) who had undergone revision THA between 2000 and 2013. The mean follow up was 40.2 months (3 months to 13.1 years). The mean age of the men and women was 62.3 years (31 to 90) and 65.1 years (25 to 92), respectively. Titanium (Ti) acetabular components were used in 536 hips while Ta components were used in 454 hips. In total, 73 (7.3%) hips experienced subsequent acetabular failure. The incidence of failure was lower in the Ta group at 4.4% (20/454) compared with 9.9% (53/536) in the Ti group (p < 0.001, odds ratio 2.38; 95% CI 1.37 to 4.27). Among the 144 hips (64 Ta, 80 Ti) for which revision had been performed because of infection, failure due to a subsequent infection was lower in the Ta group at 3.1% (2/64) compared with 17.5% (14/80) for the Ti group (p = 0.006). Thus, the use of Ta acetabular components during revision THA was associated with a lower incidence of failure from all causes and Ta components were associated with a lower incidence of subsequent infection when used in patients with periprosthetic joint infection.

材料
Product Number
品牌
产品描述

Sigma-Aldrich
钽, powder, −325 mesh, 99.9% trace metals basis
Sigma-Aldrich
钽, powder, 99.99% trace metals basis
钛, mesh, 100x100mm, nominal aperture 0.19mm, wire diameter 0.23mm, 60x60 wires/inch, open area 20%, twill weave
Sigma-Aldrich
钛, wire, diam. 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
钽, foil, thickness 0.25 mm, ≥99.9% trace metals basis
Sigma-Aldrich
钽, foil, thickness 0.05 mm, ≥99.9% trace metals basis
Sigma-Aldrich
钽, foil, thickness 0.025 mm, ≥99.9% trace metals basis
钛, mesh, 100x100mm, nominal aperture 4.3mm, wire diameter 1.5mm, 4.4x4.4 wires/inch, open area 94%, platinized diamond mesh
Sigma-Aldrich
钽, powder, 60-100 mesh, 99.9%
Sigma-Aldrich
钛, foil, thickness 2.0 mm, 99.7% trace metals basis
Sigma-Aldrich
钽, wire, diam. 1.0 mm, ≥99.9% trace metals basis
Sigma-Aldrich
钽, foil, thickness 0.5 mm, ≥99.9% trace metals basis
钛, rod, 10mm, diameter 50mm, 99.99+%
钛, rod, 25mm, diameter 50mm, 99.99+%
Sigma-Aldrich
钛, wire, diam. 0.5 mm, 99.99% trace metals basis
钛, wire, straight, 1000mm, diameter 1.0mm, as drawn, 99.6+%
钛, tube, 200mm, outside diameter 2.03mm, inside diameter 1.55mm, wall thickness 0.24mm, annealed, 99.6+%
钽, pellets, 50g, max. size 10mm, 99.9%
钽, tube, 100mm, outside diameter 12.7mm, inside diameter 11.7mm, wall thickness 0.5mm, annealed, 99.9%
钽, foil, 50x50mm, thickness 1.0mm, annealed, 99.9%
钛, wire reel, 2m, diameter 1.0mm, as drawn, 99.99+%
钛, rod, 200mm, diameter 2mm, as drawn, 99.99+%
钽, tube, 50mm, outside diameter 10.0mm, inside diameter 8.4mm, wall thickness 0.8mm, as drawn, 99.9%
钽, foil, 100x100mm, thickness 0.100mm, annealed, 99.9%
钛, wire reel, 25m, diameter 0.20mm, annealed, 99.6+%
钽, mesh, 100x100mm, nominal aperture 0.43mm, wire diameter 0.075mm, 50x50 wires/inch, open area 72%, plain weave mesh
钽, foil, 100x100mm, thickness 0.25mm, annealed, 99.9%
钛, rod, 1000mm, diameter 2mm, annealed, 99.6+%
钛, rod, 1000mm, diameter 1.5mm, annealed, 99.6+%
钛, wire reel, 1m, diameter 0.5mm, as drawn, 99.99+%