跳转至内容
Merck
CN
  • Improved physicochemical characteristics of artemisinin using succinic acid.

Improved physicochemical characteristics of artemisinin using succinic acid.

Acta poloniae pharmaceutica (2014-10-01)
Muhammad Tayyab Ansari, Humayun Pervez, Muhammad Tariq Shehzad, Syed Saeed-ul-Hassan, Zahid Mehmood, Syed Nisar Hussain Shah, Muhammad Tahir Razi, Ghulam Murtaza
摘要

Artemisinin (ARMN) is a potent antimalarial drug, which is effective against multidrug resistant strains of Plasmodium falciparum and produces rapid recovery even in patients with cerebral malaria. Being poorly soluble in water, artemisinin is incompletely absorbed after oral intake due to poor dissolution characteristics in the intestinal fluids. To enhance these properties, solid dispersions of artemisinin with succinic acid (SUC) were prepared using drug-carrier ratios 1 : 1, 1 : 4, 1 : 6, 1 : 8 and 1 : 10 by solvent evaporation and freeze drying methods. These solid dispersions were characterized by differential scanning calorimetery (DSC), Fourier transform infrared spectroscopy (FTIR), x-ray diffraction patterns (XRD), phase solubility and dissolution kinetics evaluated by applying zero order, first order, Higuchi, and Korsmeyer-Peppas models. Physical mixtures produced significantly higher aqueous solubility and rate of dissolution as compared to artemisinin alone. The dissolution profiles of all formulations followed Higuchi model and exhibited diffusion-controlled release of drug. Solvent evaporation method (SLVPs) exhibited improved solubility and freeze dried solid dispersions (FDSDs) produced highest solubility but stability constant was opposite. ARMN and SUC both were found completely crystalline as shown by their XRD patterns. Physical mixtures (PMs) showed reduced intensity in their XRD patterns while solid dispersions by SLVPs exhibited twice reduced intensity and much displaced angles, whereas FDSDs showed synergistic effects in some of ARMN and SUC peaks. DSC thermograms of FDSDs at drug-carrier ratios 1 : 1-1 : 4 showed lower melting temperature and enthalpy change (deltaH) values than respective SLVPs, whereas at higher ratios, a reverse was true. SLVPs showed displaced methyl stretching bands at lower drug-carrier ratios and exhibited O-H stretching characteristic bands of SUC at higher drug-carrier ratios. In addition, carbonyl group and C-O stretching vibrations characteristic of SUC (1307 cm(-1)) appeared prominently compared to PMs, whereas C-O stretching characteristic bands of ARMN disappeared at higher ratios. FDSDs exhibited distinct nature of bonding compared to respective SLVPs and PMs.

材料
产品编号
品牌
产品描述

Sigma-Aldrich
甲醇, suitable for HPLC, ≥99.9%
Sigma-Aldrich
丙酮, ACS reagent, ≥99.5%
Sigma-Aldrich
甲醇, ACS reagent, ≥99.8%
Sigma-Aldrich
丙酮, suitable for HPLC, ≥99.9%
Sigma-Aldrich
甲醇, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
氢氧化钠, ACS reagent, ≥97.0%, pellets
Sigma-Aldrich
丙酮, HPLC Plus, for HPLC, GC, and residue analysis, ≥99.9%
Sigma-Aldrich
氢氧化钠, reagent grade, ≥98%, pellets (anhydrous)
Sigma-Aldrich
甲醇, HPLC Plus, ≥99.9%
Sigma-Aldrich
丙酮, Laboratory Reagent, ≥99.5%
Sigma-Aldrich
氢氧化钠 溶液, 50% in H2O
Sigma-Aldrich
甲醇, anhydrous, 99.8%
Sigma-Aldrich
氢氧化钠 溶液, BioUltra, Molecular Biology, 10 M in H2O
Sigma-Aldrich
氢氧化钠 溶液, 1.0 N, BioReagent, suitable for cell culture
Sigma-Aldrich
氢氧化钠, BioXtra, ≥98% (acidimetric), pellets (anhydrous)
Sigma-Aldrich
氢氧化钠, puriss., meets analytical specification of Ph. Eur., BP, NF, E524, 98-100.5%, pellets
Sigma-Aldrich
甲醇, Laboratory Reagent, ≥99.6%
Sigma-Aldrich
甲醇, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
丙酮, suitable for HPLC, ≥99.8%
Sigma-Aldrich
丙酮, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.5% (GC)
Sigma-Aldrich
甲醇, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)
Sigma-Aldrich
氢氧化钠, reagent grade, 97%, powder
Sigma-Aldrich
甲醇, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
氢氧化钠, puriss. p.a., ACS reagent, reag. Ph. Eur., K ≤0.02%, ≥98%, pellets
Sigma-Aldrich
氢氧化钠, pellets, semiconductor grade, 99.99% trace metals basis
Sigma-Aldrich
甲醇, ACS reagent, ≥99.8%
Sigma-Aldrich
丙酮, ACS reagent, ≥99.5%
Sigma-Aldrich
氢氧化钠 溶液, 5.0 M
Supelco
丙酮, analytical standard
Sigma-Aldrich
氢氧化钠, beads, 16-60 mesh, reagent grade, 97%