Merck
CN
  • Determination of adsorption affinity of nanoparticles for interleukin-8 secreted from A549 cells by in vitro cell-free and cell-based assays.

Determination of adsorption affinity of nanoparticles for interleukin-8 secreted from A549 cells by in vitro cell-free and cell-based assays.

Journal of toxicology and environmental health. Part A (2014-12-17)
Yun-Geon Lee, Jiyoung Jeong, Jennifer Raftis, Wan-Seob Cho
摘要

The evaluation of the potential of nanoparticles (NP) for adsorbing biomolecules and use of control approaches are important for accurate presentation of in vitro analytical data. In this study, seven types of NP including carbon black (CB), cerium dioxide (CeO2), copper oxide (CuO), indium trioxide (In2O3), nickel oxide (NiO), silicon dioxide (SiO2), and titanium dioxide (TiO2) were used for determining the adsorption ability of interleukin-8 (IL-8) under either (1) a cell-free condition where NP were incubated with supernatant of A549 cells, or (2) a cell-based condition, where cells were treated with NP. Under the cell-free condition, CB and TiO2 NP showed a high adsorption affinity for IL-8 in supernatants of both lipopolysaccharide (LPS)-stimulated and unstimulated A549 cells. In contrast, SiO2 and In2O3 NP displayed a relatively low adsorption affinity. Further, IL-8 adsorption was markedly reduced when NP were predispersed in fetal bovine serum. The results obtained under cell-based conditions using both stimulated and unstimulated cells were consistent with those of the cell-free condition. Data indicate that adsorption of IL-8 onto NP surface is variable depending on type of NP, preparation method of NP, and cellular inflammatory state. Thus, the cell-free adsorption assay may be utilized for reliable interpretation of data produced by in vitro cell-based methodology.

材料
货号
品牌
产品描述

Sigma-Aldrich
L-谷氨酰胺, meets USP testing specifications, suitable for cell culture, 99.0-101.0%, from non-animal source
Sigma-Aldrich
L-谷氨酰胺, ReagentPlus®, ≥99% (HPLC)
Sigma-Aldrich
氧化钛(IV), nanopowder, 21 nm primary particle size (TEM), ≥99.5% trace metals basis
Sigma-Aldrich
氧化钛 (IV),锐钛矿, nanopowder, <25 nm particle size, 99.7% trace metals basis
SAFC
L-谷氨酰胺
Sigma-Aldrich
氧化镍(II), 99.99% trace metals basis
Sigma-Aldrich
氧化钛(IV), puriss., meets analytical specification of Ph. Eur., BP, USP, 99-100.5%
Sigma-Aldrich
氧化钛 (IV),锐钛矿, powder, 99.8% trace metals basis
Sigma-Aldrich
钛 (IV) 氧化物,金红石型, powder, <5 μm, ≥99.9% trace metals basis
Sigma-Aldrich
氧化钛(IV), ReagentPlus®, ≥99%
Sigma-Aldrich
氧化钛 (IV),锐钛矿, powder, −325 mesh, ≥99% trace metals basis
Sigma-Aldrich
钛 (IV) 氧化物,金红石型, nanopowder, <100 nm particle size, 99.5% trace metals basis
Sigma-Aldrich
氧化钛(IV),金红石和锐钛矿混合物, nanopowder, <100 nm particle size (BET), 99.5% trace metals basis
Sigma-Aldrich
氧化镍(II), nanopowder, <50 nm particle size (TEM), 99.8% trace metals basis
Sigma-Aldrich
L-谷氨酰胺, BioUltra, ≥99.5% (NT)
Sigma-Aldrich
氧化镍(II), green, −325 mesh, 99%
Supelco
L-谷氨酰胺, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
氧化钛(IV),金红石和锐钛矿混合物, nanoparticles, <150 nm particle size (volume distribution, DLS), dispersion, 40 wt. % in H2O, 99.5% trace metals basis
Sigma-Aldrich
L-谷氨酰胺, γ-irradiated, BioXtra, suitable for cell culture
Sigma-Aldrich
钛 (IV) 氧化物,金红石型, 99.995% trace metals basis
Sigma-Aldrich
钛 (IV) 氧化物,金红石型, ≥99.98% trace metals basis
Sigma-Aldrich
氧化镍(II), ≥99.995% trace metals basis
Sigma-Aldrich
L-谷氨酰胺
Sigma-Aldrich
氧化钛(IV), contains 1% Mn as dopant, nanopowder, <100 nm particle size (BET), ≥97%
Supelco
L-谷氨酰胺, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Sigma-Aldrich
氧化钛(IV), nanowires, diam. × L ~100 nm × 10 μm
Sigma-Aldrich
氧化钛(IV), nanowires, diam. × L ~10 nm × 10 μm
Sigma-Aldrich
氧化镍(II), nanowires, diam. × L ~20 nm × 10 μm
Sigma-Aldrich
钛 (IV) 氧化物,金红石型, <001>, (single crystal substrate), ≥99.9% trace metals basis, L × W × thickness 10 mm × 10 mm × 0.5 mm
Sigma-Aldrich
L-谷氨酰胺, Vetec, reagent grade, ≥99%